HIP2100 Datasheet PDF (High Frequency Half Bridge Driver)

HIP2100 - High Frequency Half Bridge Driver

Description

Positive Supply to lower gate drivers.

De-couple this pin to VSS.

Bootstrap diode connected to HB.

Features

Drives N-Channel MOSFET Half Bridge.
SOIC, EPSOIC, and QFN Package Options.
SOIC and EPSOIC Packages Compliant with 100V Conductor Spacing Guidelines of IPC-2221.
Pb-Free (RoHS Compliant).
Bootstrap Supply Max Voltage to 114VDC.
On-Chip 1Ω Bootstrap Diode.
Fast Propagation Times for Multi-MHz Circuits.
Drives 1000pF Load with Rise and Fall Times Typ 10ns.
CMOS Input Thresholds for Improved Noise Immunity.

Datasheet Details

Part number	HIP2100
Manufacturer	Renesas
File Size	666.34 KB
Description	High Frequency Half Bridge Driver
Datasheet	HIP2100 Datasheet

📁 Similar Datasheet

HIP2106 - 100V/1A Peak/ Low Cost/ High Frequency Half Bridge Driver (Intersil Corporation)

HIP2500 - Half Bridge 500VDC Driver (Harris Corporation)

HIP0063 - Hex Low Side MOSFET Driver with Serial or Parallel Interface and Diagnostic Fault Control (Intersil Corporation)

HIP1030 - 1A High Side Driver with Overload Protection (Intersil Corporation)

HIP1031 - Half Amp High Side Driver with Overload Protection (Intersil Corporation)

HIP1090 - Protected High Side Power Switch with Transient Suppression (Intersil Corporation)

HIP4011 - Three Phase Brushless DC Motor Controller (Intersil Corporation)

HIP4081 - 80V/2.5A Peak/ High Frequency Full Bridge FET Driver (Intersil Corporation)

HIP5010 - 7V/ 17A SynchroFET Complementary Drive Synchronous Half-Bridge (Intersil Corporation)

HIP5011 - 7V/ 17A SynchroFET Complementary Drive Synchronous Half-Bridge (Intersil Corporation)

Full PDF Text Transcription

Click to expand full text

DATASHEET HIP2100 100V/2A Peak, Low Cost, High Frequency Half Bridge Driver FN4022 Rev.16.00 Aug 8, 2019 The HIP2100 is a high frequency, 100V Half Bridge N-Channel power MOSFET driver IC. The low-side and high-side gate drivers are independently controlled and matched to 8ns. This gives the user maximum flexibility in dead-time selection and driver protocol. Undervoltage protection on both the low-side and high-side supplies force the outputs low. An on-chip diode eliminates the discrete diode required with other driver ICs. A new level-shifter topology yields the low-power benefits of pulsed operation with the safety of DC operation. Unlike some competitors, the high-side output returns to its correct state after a momentary undervoltage of the high-side supply.

Published: Nov 21, 2017 |