Datasheet4U Logo Datasheet4U.com

HIP1030 - 1A High Side Driver with Overload Protection

Description

The HIP1030 is a High Side Driver Power Integrated Circuit designed to switch power supply voltage to an output load.

It is the equivalent of a PNP pass transistor operated as a protected high side current switch in the saturated ON state with low forward voltage drop at the maximum rated current.

Features

  • Over Operating Temperature Range . . -40oC to 125oC - Max VSAT at 1A.
  • . . . 1V - Current Switching Capability.
  • . .1A - Power Supply Range.
  • . 4.5V to 25V.
  • Over-Voltage Shutdown Protected.
  • Over-Current Limiting.
  • Thermal Limiting Protection.
  • Negative Output Voltage Clamp.
  • CMOS/TTL Logic Level Control Input.
  • Load Dump.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HIP1011 PCI Hot Plug Controller Renesas
HIP1011A PCI Hot Plug Controller Renesas
HIP1011B PCI Hot Plug Controller Renesas
HIP1011D Dual Slot PCI Hot Plug Controller Renesas
HIP1011E Dual Slot PCI Hot Plug Controller Renesas

Other Datasheets by Intersil (Renesas)

Part Number Description
HIP1031 Half Amp High Side Driver with Overload Protection
HIP1090 Protected High Side Power Switch with Transient Suppression
HIP0063 Hex Low Side MOSFET Driver with Serial or Parallel Interface and Diagnostic Fault Control
HIP2106 100V/1A Peak/ Low Cost/ High Frequency Half Bridge Driver
HIP4011 Three Phase Brushless DC Motor Controller

Full PDF Text Transcription

Click to expand full text
HIP1030 December 1997 1A High Side Driver with Overload Protection Description The HIP1030 is a High Side Driver Power Integrated Circuit designed to switch power supply voltage to an output load. It is the equivalent of a PNP pass transistor operated as a protected high side current switch in the saturated ON state with low forward voltage drop at the maximum rated current. The HIP1030 has low output leakage and low idle current in the OFF state. The Functional Block Diagram for the HIP1030 shows the protection control circuit functions of over-current, overvoltage and over-temperature. A small metal resistor senses overcurrent in the power supply path of the pass transistor and load.
Published: |