Datasheet4U Logo Datasheet4U.com

HIP2120 - High Frequency Half-Bridge Driver

Description

Positive supply voltage for lower gate driver.

Decouple this pin with a ceramic capacitor to VSS.

High-side bootstrap supply voltage referenced to HS.

Features

  • 9 Ld TDFN “B” Package Compliant with 100V Conductor Spacing Guidelines per IPC-2221.
  • Break-Before-Make Dead-Time Prevents Shoot-through and is adjustable up to 220ns.
  • Bootstrap Supply Max Voltage to 114VDC.
  • Wide Supply Voltage Range (8V to 14V).
  • Supply Undervoltage Protection.
  • CMOS Compatible Input Thresholds with Hysteresis (HIP2120).
  • 1.6/1 Typical Output Pull-up/Pull-down Resistance.
  • On-Chip 1 Bootstrap Diode Applicati.

📥 Download Datasheet

Datasheet Details

Part number HIP2120
Manufacturer Renesas
File Size 781.47 KB
Description High Frequency Half-Bridge Driver
Datasheet download datasheet HIP2120 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HIP2106 100V/1A Peak/ Low Cost/ High Frequency Half Bridge Driver Intersil Corporation
HIP2500 Half Bridge 500VDC Driver Harris Corporation
HIP0063 Hex Low Side MOSFET Driver with Serial or Parallel Interface and Diagnostic Fault Control Intersil Corporation
HIP1030 1A High Side Driver with Overload Protection Intersil Corporation
HIP1031 Half Amp High Side Driver with Overload Protection Intersil Corporation

Other Datasheets by Renesas

Part Number Description
HIP2121 High Frequency Half-Bridge Driver
HIP2122 High Frequency Half-Bridge Driver
HIP2123 High Frequency Half-Bridge Driver
HIP2100 High Frequency Half Bridge Driver
HIP2101 High Frequency Half Bridge Driver

Full PDF Text Transcription

Click to expand full text
HIP2120, HIP2121 NcO1oN-T8nO8Rt8aRE-cICEtNCOoTuOMErRMMTSMeEIcNLEhNDonDEricDEwaDwlFSOwRu.REipnPpNtLeoEArrWstCiClE.DceMEonEmSteNI/GrtTsaNctS 100V, 2A Peak, High Frequency Half-Bridge Drivers with Adjustable Dead Time Control and PWM Input DATASHEET FN7668 Rev 0.00 December 23, 2011 The HIP2120 and HIP2121 are 100V, high frequency, half-bridge MOSFET driver ICs. They are based on the popular ISL2100A and ISL2101A half-bridge drivers. These drivers have a programmable dead-time to insure break-before-make operation between the high-side and low-side drivers. The dead-time is adjustable up to 250ns. A single PWM logic input controls both bridge outputs (HO, LO). An enable pin (EN), when low, drives both outputs to a low state.
Published: |