Datasheet4U Logo Datasheet4U.com

HIP2104 - Half Bridge Driver

Download the HIP2104 datasheet PDF. This datasheet also covers the HIP2103 variant, as both devices belong to the same half bridge driver family and are provided as variant models within a single manufacturer datasheet.

Description

.

.

3.

.

Features

  • 60V maximum bootstrap supply voltage.
  • 3.3V and 12V LDOs with dedicated enable pins (HIP2104).
  • 5µA sleep mode quiescent current.
  • VDD undervoltage lockout.
  • 3.3V or 5V CMOS compatible inputs with hysteresis.
  • Integrated bootstrap FET (replaces traditional boot strap diode).
  • HIP2103 is available in 8 Ld SOIC and 3x3mm TDFN packages.
  • HIP2104 is available in a 4x4mm, 12 Ld DFN package.
  • Pb-Free (RoHS Compliant).

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (HIP2103-Renesas.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number HIP2104
Manufacturer Renesas
File Size 523.72 KB
Description Half Bridge Driver
Datasheet download datasheet HIP2104 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HIP2106 100V/1A Peak/ Low Cost/ High Frequency Half Bridge Driver Intersil Corporation
HIP2500 Half Bridge 500VDC Driver Harris Corporation
HIP0063 Hex Low Side MOSFET Driver with Serial or Parallel Interface and Diagnostic Fault Control Intersil Corporation
HIP1030 1A High Side Driver with Overload Protection Intersil Corporation
HIP1031 Half Amp High Side Driver with Overload Protection Intersil Corporation

Other Datasheets by Renesas

Part Number Description
HIP2100 High Frequency Half Bridge Driver
HIP2101 High Frequency Half Bridge Driver
HIP2103 Half Bridge Driver
HIP2105 Low Voltage Driver
HIP2106A Low Voltage Driver

Full PDF Text Transcription

Click to expand full text
Datasheet HIP2103, HIP2104 60V, 1A/2A Peak, Half-Bridge Driver with 4V UVLO The HIP2103 and HIP2104 are half-bridge drivers designed for applications using DC motors, 3-phase brushless DC motors, or other similar loads. The two inputs (HI and LI) independently control the high-side driver (HO) and the low-side driver (LO). HI and LI can be configured to enable/disable the device, which lowers the number of connections to a microcontroller and the cost. The low IDD bias current in the Sleep Mode prevents battery drain when the device is not in use, which eliminates the need for an external switch to disconnect the driver from the battery. Integrated pull-down resistors on all of the inputs (LI, HI, VDen, and VCen) reduce the need for external resistors.
Published: |