Datasheet4U Logo Datasheet4U.com

SY10EL33L - 5V/3.3V / 4 DIVIDER

This page provides the datasheet information for the SY10EL33L, a member of the SY100EL33L 5V/3.3V / 4 DIVIDER family.

Description

The SY10/100EL33/L are integrated ÷ 4 dividers.

The differential clock inputs and the VBB allow a differential, single-ended or AC-coupled interface to the device.

If used, the VBB output should be bypassed to ground with a 0.01µF capacitor.

Features

  • s s s s s s 3.3V and 5V power supply options 650ps propagation delay 4.0GHz toggle frequency High bandwidth output transistions Internal 75KΩ input pull-down resistors Available in 8-pin SOIC package.

📥 Download Datasheet

Datasheet preview – SY10EL33L

Datasheet Details

Part number SY10EL33L
Manufacturer Micrel Semiconductor
File Size 59.05 KB
Description 5V/3.3V / 4 DIVIDER
Datasheet download datasheet SY10EL33L Datasheet
Additional preview pages of the SY10EL33L datasheet.

📁 Similar Datasheet

  • SY10ELT23 - DUAL DIFFERENTIAL PECL-to-TTL TRANSLATOR (Synergy)
  • SY10 - SYNCHRONOUS EQUIPMENT STRATUM 3/3E CLOCK UNIT (Raltron Electronics)
  • SY100 - 3 Port Solenoid Valve Rubber Seal (SMC)
  • SY100EL11V - 5V/3.3V ECL 1:2 Differential Fanout Buffe (Microchip)
  • SY100EL16S - 5V VARIABLE OUTPUT SWING DIFFERENTIAL RECEIVER (Synergy)
  • SY100EL16V - 5V/3.3V ECL Differential Receiver (Microchip)
  • SY100EL16VS - 3.3V/5V Variable Output Swing Differential Receiver (Microchip)
  • SY100EL29V - 5V/3.3V Dual Differential Data and Clock D Flip-Flop (Microchip)
  • SY100EL33L - 3.3V ECL/4 Divider (Microchip)
  • SY100EL52 - 5V ECL Differential Data and Clock D Flip-Flop (Microchip)
Other Datasheets by Micrel Semiconductor

Full PDF Text Transcription

Click to expand full text
5V/3.3V ÷ 4 DIVIDER ClockWorks™ SY10EL33/L SY100EL33/L FEATURES s s s s s s 3.3V and 5V power supply options 650ps propagation delay 4.0GHz toggle frequency High bandwidth output transistions Internal 75KΩ input pull-down resistors Available in 8-pin SOIC package DESCRIPTION The SY10/100EL33/L are integrated ÷ 4 dividers. The differential clock inputs and the VBB allow a differential, single-ended or AC-coupled interface to the device. If used, the VBB output should be bypassed to ground with a 0.01µF capacitor. Also note that the VBB is designed to be used as an input bias on the EL33/L only; the VBB output has limited current sink and source capability. The reset pin is asynchronous and is asserted on the rising edge.
Published: |