Datasheet4U Logo Datasheet4U.com

HD74ALVCH162543 - 16-bit Registered Transceivers with 3-state Outputs

General Description

The HD74ALVCH162543 can be used as two 8-bit transceivers or one 16-bit transceiver.

Separate latch enable (LEAB or LEBA) and output enable ( OEAB or OEBA ) inputs are provided for each register to permit independent control in either direction of data flow.

Key Features

  • VCC = 2.3 V to 3.6 V.
  • Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C).
  • Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C).
  • High output current ±12 mA (@VCC = 3.0 V).
  • Bus hold on data inputs eliminates the need for external pullup / pulldown resistors.
  • All outputs have equivalent 26 Ω series resistors, so no external resistors are required. HD74ALVCH162543 Function Table.
  • 2 Inputs CEAB H X L L L LEAB X X H L L OEAB X H.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HD74ALVCH162543 16-bit Registered Transceivers with 3-state Outputs ADE-205-183 (Z) Preliminary 1st. Edition December 1996 Description The HD74ALVCH162543 can be used as two 8-bit transceivers or one 16-bit transceiver. Separate latch enable (LEAB or LEBA) and output enable ( OEAB or OEBA ) inputs are provided for each register to permit independent control in either direction of data flow. The A to B enable (CEAB) input must be low in order to enter data from A or to output data from B. If CEAB is low and LEAB is low, the A to B latches are transparent; a subsequent low to high transition of LEAB puts the A latches in the storage mode. With CEAB and OEAB both low, the 3-state B outputs are active and reflect the data present at the output of the A latches.