Datasheet4U Logo Datasheet4U.com

SN74LVC2G02-EP - Dual 2-Input Positive-NOR Gate

General Description

This dual 2-input positive-NOR gate is designed for 1.65-V to 5.5-V VCC operation.

B in positive logic.

This device is fully specified for partial-power-down applications using Ioff.

Key Features

  • 1.
  • Controlled Baseline.
  • One Assembly Site.
  • One Test Site.
  • One Fabrication Site.
  • Extended Temperature Performance of.
  • 55°C to 125°C.
  • Enhanced Diminishing Manufacturing Sources (DMS) Support.
  • Enhanced Product Change Notification.
  • Qualification Pedigree (1).
  • Supports 5-V VCC Operation.
  • Inputs Accept Voltages to 5.5 V.
  • Max tpd of 5.9 ns at 3.3 V.
  • Low Power Consumption, 10 μA Max ICC (1.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LVC1G125 high performance non-inverting buffer UMW
SN74LVC1G34 Single buffer UMW
SN74L71 AND-Gate R-S Master-Slave F-F National Semiconductor
SN74L74N Dual D-Type Flip-Flop ETC
SN74LS00 QUAD 2-INPUT NAND GATE Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN74LVC2G02 Dual 2-Input Positive-NOR Gate
SN74LVC2G00 Dual 2-Input Positive-NAND Gate
SN74LVC2G00W-EP DUAL 2-INPUT POSITIVE-NAND GATE
SN74LVC2G04 Dual Inverter Gate
SN74LVC2G04-EP Dual Inverter Gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com SN74LVC2G02-EP DUAL 2-INPUT POSITIVE-NOR GATE SGDS034A – SEPTEMBER 2007 – REVISED SEPTEMBER 2007 FEATURES 1 • Controlled Baseline – One Assembly Site – One Test Site – One Fabrication Site • Extended Temperature Performance of –55°C to 125°C • Enhanced Diminishing Manufacturing Sources (DMS) Support • Enhanced Product Change Notification • Qualification Pedigree (1) • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 5.9 ns at 3.3 V • Low Power Consumption, 10 μA Max ICC (1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range.