Datasheet4U Logo Datasheet4U.com

XCL104 - Step-up DC/DC Converters

Description

FET and a 0.23Ω synchronous Pch switching FET built-in.

Features

  • r>.
  • Portable equipment Input Voltage Range : 0.65V ~ 6.0V (Operation start voltage : 0.9V).
  • Beauty & health equipment.
  • Wearable devices.
  • Game & Hobby.
  • PC Peripherals.
  • Devices with 1~3 Alkaline, 1~3 Nickel Hydride, 1 Lithium and 1 Li-ion Fixed Output Voltage Oscillation Frequency Output Current Control Mode Selection Load Transient Response : 1.8V ~ 5.5V (A,B,C type) : 2.2V ~ 5.5V (except A,B,C type) : 1.2MHz : 710mA @VOUT=5.0V, VIN=3.3V 420mA @VOUT=3.3V, VIN=1.8V : PWM (X.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XCL201 Inductor Built-in Step-Down micro DC/DC Converters Torex Semiconductor
XCL202 Inductor Built-in Step-Down micro DC/DC Converters Torex Semiconductor
XCL205 Inductor Built-in Step-Down micro DC/DC Converters Torex Semiconductor
XCL206 Inductor Built-in Step-Down micro DC/DC Converters Torex Semiconductor
XCL207 Inductor Built-in Step-Down micro DC/DC Converters Torex Semiconductor

Other Datasheets by Torex Semiconductor

Part Number Description
XCL100 Inductor Built-in Step-up micro DC/DC Converter
XCL101 Inductor Built-in Step-up micro DC/DC Converter
XCL102 Inductor Built-in Step-up micro DC/DC Converter
XCL103 Inductor Built-in Step-up micro DC/DC Converter
XCL105 Step-up DC/DC Converters

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
XCL104/XCL105 Series ETR28031-001a 1.4A, Inductor Built-in Step-up DC/DC Converters ☆Green Operation compatible ■GENERAL DESCRIPTION XCL104/XCL105 series are synchronous step-up DC/DC converters which integrates an inductor with a 0.17Ω Nch driver FET and a 0.23Ω synchronous Pch switching FET built-in. The series are able to start operation from an input voltage of 0.9V, suitable for equipment using single Alkaline battery or Nickel metal hydride battery. The output voltage can be set from 1.8V to 5.5V in steps of 0.1V. During the devices enter stand-by mode, A/D/G/J types prevent the application malfunction by CL Discharge function which can quickly discharge the electric charge at the output capacitor (CL).
Published: |