CRG1206
Overview
- Thick film resistors with a high power to size ratio,ideally suited to industrial and general purpose use. A range from 1 ohm to 10M and tolerances of 1% and 5%. Also including zero ohm links.
- Suitable for most applications, including high frequency operation, owing to the short lead structure and low capacitance.
- Seven Package Sizes
- Terminal finish: Matte Sn
- MSL Level 2 Thick Film Chip Resistors Type CRG Series Precious metal terminations are screen printed onto a ceramic base and fired. The resistive element is screen printed and fired and the passivation layer added. Each resistor is trimmed to tolerance by laser. The pre-scribed tile is broken into strips, the end plating is fired on and the strips broken into individual components. Final termination is made by electroplating. Characteristics - Electrical Rated Power @ 70 °C (W) Resistance Range Min (Ohms) Max Tolerance (%) Code letter Selection Series Temp. Coefficient (ppm/°C) 10 1M0
