74CBTLV3257-Q100 Datasheet PDF (Quad 1-of-2 multiplexer/demultiplexer)

74CBTLV3257-Q100 - Quad 1-of-2 multiplexer/demultiplexer

Description

The 74CBTLV3257-Q100 provides a quad 1-of-2 high-speed multiplexer/demultiplexer with common select (S) and output enable (OE) inputs.

The low ON resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise.

Features

Automotive product qualification in accordance with AEC-Q100 (Grade 1).
Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
Supply voltage range from 2.3 V to 3.6 V.
High noise immunity.
Complies with JEDEC standard:.
JESD8-5 (2.3 V to 2.7 V).
JESD8-B/JESD36 (2.7 V to 3.6 V).
ESD protection:.
MIL-STD-883, method 3015 exceeds 2000 V.
HBM JESD22-A114F exceeds 2000 V.
MM JESD22-A115-A exceeds.

Datasheet Details

Part number	74CBTLV3257-Q100
Manufacturer	nexperia
File Size	299.83 KB
Description	Quad 1-of-2 multiplexer/demultiplexer
Datasheet	74CBTLV3257-Q100 Datasheet
Additional preview pages of the 74CBTLV3257-Q100 datasheet.

📁 Similar Datasheet

74CBTLV3257 - Quad 1-of-2 multiplexer/demultiplexer (NXP)

74CBTLV3257 - LOW-VOLTAGE QUAD 2:1MUX/DEMUX BUS SWITCH (Renesas)

74CBTLV3253 - LOW-VOLTAGE DUAL 1-OF-4 MULTIPLEXER/DEMULTIPLEXER (Renesas)

74CBTLV3244 - LOW-VOLTAGE OCTAL BUS SWITCH (Renesas)

74CBTLV3244 - LOW-VOLTAGE OCTAL BUS SWITCH (IDT)

74CBTLV3245 - 8-bit bus (NXP)

74CBTLV3245 - LOW-VOLTAGE OCTAL BUS SWITCH (Renesas)

74CBTLV3125 - 4-bit bus switch (NXP)

74CBTLV3126 - 4-bit Bus Switch (NXP)

74CBTLV3384 - LOW-VOLTAGE 10-BIT BUS SWITCH (Renesas)

Full PDF Text Transcription

Click to expand full text

74CBTLV3257-Q100 Quad 1-of-2 multiplexer/demultiplexer Rev. 4 — 14 July 2020 Product data sheet 1. General description The 74CBTLV3257-Q100 provides a quad 1-of-2 high-speed multiplexer/demultiplexer with common select (S) and output enable (OE) inputs. The low ON resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. When pin OE = LOW, one of the two switches is selected (low-impedance ON-state) with pin S. When pin OE = HIGH, all switches are in the high-impedance OFF-state, independent of pin S. To ensure the high-impedance OFF-state during power-up or power-down, OE should be tied to the VCC through a pull-up resistor.

Published: Jul 29, 2019 |