74CBTLV3257 Datasheet PDF (Quad 1-of-2 multiplexer/demultiplexer)

74CBTLV3257 - Quad 1-of-2 multiplexer/demultiplexer

Description

The 74CBTLV3257 provides a quad 1-of-2 high-speed multiplexer/demultiplexer with common select (S) and output enable (OE) inputs.

The low ON resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise.

Features

Supply voltage range from 2.3 V to 3.6 V.
High noise immunity.
Complies with JEDEC standard:.
JESD8-5 (2.3 V to 2.7 V).
JESD8-B/JESD36 (2.7 V to 3.6 V).
ESD protection:.
HBM JESD22-A114F exceeds 2000 V.
MM JESD22-A115-A exceeds 200 V.
CDM AEC-Q100-011 revision B exceeds 1000 V.
5  switch connection between two ports.
Rail to rail switching on data I/O ports.
CMOS low power consumption.
Latch-up performance exceeds 250 mA per JESD.

Datasheet Details

Part number	74CBTLV3257
Manufacturer	NXP
File Size	261.76 KB
Description	Quad 1-of-2 multiplexer/demultiplexer
Datasheet	74CBTLV3257 Datasheet
Additional preview pages of the 74CBTLV3257 datasheet.

📁 Similar Datasheet

74CBTLV3257 - Quad 1-of-2 multiplexer/demultiplexer (nexperia)

74CBTLV3257 - LOW-VOLTAGE QUAD 2:1MUX/DEMUX BUS SWITCH (Renesas)

74CBTLV3257-Q100 - Quad 1-of-2 multiplexer/demultiplexer (nexperia)

74CBTLV3253 - LOW-VOLTAGE DUAL 1-OF-4 MULTIPLEXER/DEMULTIPLEXER (Renesas)

74CBTLV3253 - Dual 1-of-4 multiplexer/demultiplexer (nexperia)

74CBTLV3253-Q100 - Dual 1-of-4 multiplexer/demultiplexer (nexperia)

74CBTLV3253D - Dual 1-of-4 multiplexer/demultiplexer (nexperia)

74CBTLV3244 - LOW-VOLTAGE OCTAL BUS SWITCH (Renesas)

74CBTLV3244 - 8-bit bus switch (nexperia)

74CBTLV3244 - LOW-VOLTAGE OCTAL BUS SWITCH (IDT)

Full PDF Text Transcription

Click to expand full text

74CBTLV3257 Quad 1-of-2 multiplexer/demultiplexer Rev. 5 — 11 November 2016 Product data sheet 1. General description The 74CBTLV3257 provides a quad 1-of-2 high-speed multiplexer/demultiplexer with common select (S) and output enable (OE) inputs. The low ON resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. When pin OE = LOW, one of the two switches is selected (low-impedance ON-state) with pin S. When pin OE = HIGH, all switches are in the high-impedance OFF-state, independent of pin S. Schmitt trigger action at control input makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 2.3 V to 3.6 V.

Published: Jul 3, 2019 |