Datasheet4U Logo Datasheet4U.com

BM2P013 - DC/DC Converter

Features

  • PWM frequency : 65kHz.
  • PWM current mode method.
  • Burst operation when load is light.
  • Frequency reduction function.
  • Built-in 650V start circuit.
  • Built-in 650V switching MOSFET.
  • VCC pin under voltage protection.
  • VCC pin overvoltage protection.
  • SOURCE pin Open protection.
  • SOURCE pin Short protection.
  • SOURCE pin Leading-Edge-Blanking function.
  • Per-cycle over current protection circuit.
  • Soft start.
  • Secondary Over current protectio.

📥 Download Datasheet

Datasheet preview – BM2P013

Datasheet Details

Part number BM2P013
Manufacturer ROHM
File Size 866.85 KB
Description DC/DC Converter
Datasheet download datasheet BM2P013 Datasheet
Additional preview pages of the BM2P013 datasheet.
Other Datasheets by ROHM

Full PDF Text Transcription

Click to expand full text
Datasheet AC/DC Drivers PWM type DC/DC converter IC Included 650V MOSFET BM2PXX3 Series ●General The PWM type DC/DC converter (BM2PXX3) for AC/DC provide an optimum system for all products that include an electrical outlet. BM2PXX3 supports both isolated and non-isolated devices, enabling simpler design of various types of low-power electrical converters. BM2PXX3 built in a HV starter circuit that tolerates 650V, it contributes to low-power consumption. With current detection resistors as external devices, a higher degree of design freedom is achieved. Since current mode control is utilized, current is restricted in each cycle and excellent performance is demonstrated in bandwidth and transient response. The switching frequency is 65 kHz.
Published: |