Datasheet4U Logo Datasheet4U.com

CLC533 - High-Speed 4:1 Analog Multiplexer

Download the CLC533 datasheet PDF. This datasheet also covers the CLC variant, as both devices belong to the same high-speed 4:1 analog multiplexer family and are provided as variant models within a single manufacturer datasheet.

Description

The CLC533 is a high-speed 4:1 multiplexer employing active input and output stages.

The CLC533 also employs a closed-loop design which dramatically improves accuracy over conventional analog multiplexer circuits.

Features

  • s s s s s s 12-bit settling (0.01%).
  • 17ns Low noise.
  • 42µVrms Isolation.
  • 80dB @ 10MHz 110MHz -3dB bandwidth (Av = +2) Low distortion.
  • 80dB @ 5MHz Adjustable bandwidth.
  • 180MHz (max) Infrared system multiplexing CCD sensor signals Radar I/Q switching High definition video HDTV Test and calibration.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (CLC-533.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
CLC-207 Low Distortion Wideband Op Amp Comlinear Corporation
CLC001 CLC001 Serial Digital Cable Driver with Adjustable Outputs (Rev. B) ETCTI
CLC006 CLC006 Serial Digital Cable Driver with Adjustable Outputs (Rev. G) ETCTI
CLC007 CLC007 Serial Digital Cable Driver with Dual Complementary Outputs (Rev. E) ETCTI
CLC020 CLC020 SMPTE 259M Digital Video Serializer with Integrated Cable Driver (Rev. E) ETCTI

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
CLC532 High-Speed 2:1 Analog Multiplexer
CLC501 High-Speed Output Clamping Op Amp
CLC502 Clamping/ Low-Gain Op Amp with Fast 14-bit Settling
CLC503 Comlinear CLC503 180MHz / Differential-Output Amplifier
CLC505 High-Speed/ Programmable-Supply Current/ Monolithic Op Amp

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CLC533 High-Speed 4:1 Analog Multiplexer June 1999 N CLC533 High-Speed 4:1 Analog Multiplexer General Description The CLC533 is a high-speed 4:1 multiplexer employing active input and output stages. The CLC533 also employs a closed-loop design which dramatically improves accuracy over conventional analog multiplexer circuits. This monolithic device is constructed using an advanced high-performance bipolar process. The CLC533 has been specifically designed to provide a 24ns settling time to 0.01%. This coupled with the adjustable bandwidth, makes the CLC533 an ideal choice for infrared and CCD imaging systems, with channel-to-channel isolation of 80dB @ 10MHz. Low distortion and spurious signal levels (-80dBc) make the CLC533 a very suitable choice for I/Q processors in radar receivers.
Published: |