Datasheet4U Logo Datasheet4U.com

CLC503 - Comlinear CLC503 180MHz / Differential-Output Amplifier

Description

The Comlinear CLC503 is a single-ended to differential amplifier.

It utilizes a pair of closed-loop transconductance amplifiers to provide wideband, high fidelity, differential output signals.

Internal resistors set the differential gain to 2V/V.

Features

  • s s s s -77dBc distortion (10MHz, 4Vpp) 72dB SNR (4Vpp) 15ns settling (0.1%) 180MHz bandwidth Single-to-differential conversion Single supply ADC signal conditioner.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CLC-207 Low Distortion Wideband Op Amp Comlinear Corporation
CLC001 CLC001 Serial Digital Cable Driver with Adjustable Outputs (Rev. B) ETCTI
CLC006 CLC006 Serial Digital Cable Driver with Adjustable Outputs (Rev. G) ETCTI
CLC007 CLC007 Serial Digital Cable Driver with Dual Complementary Outputs (Rev. E) ETCTI
CLC020 CLC020 SMPTE 259M Digital Video Serializer with Integrated Cable Driver (Rev. E) ETCTI

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
CLC501 High-Speed Output Clamping Op Amp
CLC502 Clamping/ Low-Gain Op Amp with Fast 14-bit Settling
CLC505 High-Speed/ Programmable-Supply Current/ Monolithic Op Amp
CLC520 Amplifier with Voltage Controlled Gain/ AGC+Amp
CLC522 Wideband Variable-Gain Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Comlinear CLC503 180MHz, Differential-Output Amplifier August 1996 N Comlinear CLC503 180MHz, Differential-Output Amplifier General Description The Comlinear CLC503 is a single-ended to differential amplifier. It utilizes a pair of closed-loop transconductance amplifiers to provide wideband, high fidelity, differential output signals. Internal resistors set the differential gain to 2V/V. With a ground-centered 2Vpp input signal, the CLC503 will produce a 4Vpp differential output signal. This differential output signal is centered around an adjustable common mode voltage. An independent input controls the common mode output voltage. The CLC503 has harmonic distortion products of -77dBc or less, and a signal to noise ratio of 72dB.
Published: |