Datasheet4U Logo Datasheet4U.com

CLC532 - High-Speed 2:1 Analog Multiplexer

Description

The CLC532 is a high-speed 2:1 multiplexer with active input and output stages.

The CLC532 also employs a closed-loop design which dramatically improves accuracy.

This monolithic device is constructed using an advanced high-performance bipolar process.

Features

  • s s s s s 12-bit settling (0.01%) - 17ns Low noise - 32µVrms High isolation - 80dB @ 10MHz Low distortion - 80dBc @ 5MHz Adjustable bandwidth - 190MHz (max) Infrared system multiplexing CCD sensor signals Radar I/Q switching High definition video HDTV Test and calibration.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CLC-207 Low Distortion Wideband Op Amp Comlinear Corporation
CLC001 CLC001 Serial Digital Cable Driver with Adjustable Outputs (Rev. B) ETCTI
CLC006 CLC006 Serial Digital Cable Driver with Adjustable Outputs (Rev. G) ETCTI
CLC007 CLC007 Serial Digital Cable Driver with Dual Complementary Outputs (Rev. E) ETCTI
CLC020 CLC020 SMPTE 259M Digital Video Serializer with Integrated Cable Driver (Rev. E) ETCTI

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
CLC533 High-Speed 4:1 Analog Multiplexer
CLC501 High-Speed Output Clamping Op Amp
CLC502 Clamping/ Low-Gain Op Amp with Fast 14-bit Settling
CLC503 Comlinear CLC503 180MHz / Differential-Output Amplifier
CLC505 High-Speed/ Programmable-Supply Current/ Monolithic Op Amp

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CLC532 High-Speed 2:1 Analog Multiplexer June 1999 N CLC532 High-Speed 2:1 Analog Multiplexer General Description The CLC532 is a high-speed 2:1 multiplexer with active input and output stages. The CLC532 also employs a closed-loop design which dramatically improves accuracy. This monolithic device is constructed using an advanced high-performance bipolar process. The CLC532 has been specifically designed to provide settling times of 17ns to 0.01%. This, coupled with the adjustable noise-bandwidth, makes the CLC532 an ideal choice for infrared and CCD imaging systems. Channel-to-channel isolation is better than 80dB @ 10MHz. Low distortion (80dBc) and spurious signal levels make the CLC532 a very suitable choice for both I/Q processors and receivers.
Published: |