Datasheet4U Logo Datasheet4U.com

XRA1403 - 16-Bit SPI GPIO Expander

Description

The XRA1403 is an 16-bit GPIO expander with an SPI interface.

After power-up, the XRA1403 has internal 100K ohm pull-up resistors on each I/O pin that can be individually enabled.

In addition, the GPIOs on the XRA1403 can individually be controlled and configured.

Features

  • 1.65V to 3.6V operating voltage.
  • 16 General Purpose I/Os (GPIOs).
  • 5V tolerant inputs.
  • Maximum stand-by current of 1uA at +1.8V.
  • SPI bus interface.
  • SPI Clock Frequency up to 26MHz.
  • Individually programmable inputs.
  • Internal pull-up resistors.
  • Polarity inversion.
  • Individual interrupt enable.
  • Rising edge and/or Falling edge interrupt.
  • Input filter.
  • Individually programmable outputs.
  • Output Level Control.
  • Output Three-State.

📥 Download Datasheet

Datasheet preview – XRA1403

Datasheet Details

Part number XRA1403
Manufacturer MaxLinear
File Size 1.20 MB
Description 16-Bit SPI GPIO Expander
Datasheet download datasheet XRA1403 Datasheet
Additional preview pages of the XRA1403 datasheet.

📁 Similar Datasheet

  • XRA1403 - 16-BIT SPI GPIO EXPANDER (Exar)
  • XRA1402 - 8-BIT SPI GPIO EXPANDER (Exar)
  • XRA1404 - 8-BIT SPI GPIO EXPANDER (Exar)
  • XRA1405 - 16-BIT SPI GPIO EXPANDER (Exar)
  • XRA10324AF - Quad Operational Amplifiers (ETC)
  • XRA1200 - 8-BIT I2C/SMBUS GPIO EXPANDER (Exar)
  • XRA1200P - 8-BIT I2C/SMBUS GPIO EXPANDER (Exar)
  • XRA1201 - 16-BIT I2C/SMBUS GPIO EXPANDER (Exar)
  • XRA1201P - 16-BIT I2C/SMBUS GPIO EXPANDER (Exar)
  • XRA1202 - 8-BIT I2C/SMBUS GPIO EXPANDER (Exar)
Other Datasheets by MaxLinear
  • XRA1402 - 8-Bit SPI GPIO Expander
  • XRA1404 - 8-Bit SPI GPIO Expander
  • XRA1201 - 16-BIT I2C / SMBUS GPIO EXPANDER
  • XRA1201P - 16-BIT I2C / SMBUS GPIO EXPANDER

Full PDF Text Transcription

Click to expand full text
XRA1403 16-Bit SPI GPIO Expander with Reset Input February 2, 2022 Rev. 1.0.2 GENERAL DESCRIPTION The XRA1403 is an 16-bit GPIO expander with an SPI interface. After power-up, the XRA1403 has internal 100K ohm pull-up resistors on each I/O pin that can be individually enabled. In addition, the GPIOs on the XRA1403 can individually be controlled and configured. As outputs, the GPIOs can be outputs that are high, low or in three-state mode. The three-state mode feature is useful for applications where the power is removed from the remote devices, but they may still be connected to the GPIO expander. As inputs, the internal pull-up resistors can be enabled or disabled and the input polarity can be inverted. The interrupt can be programmed for different behaviors.
Published: |