Datasheet4U Logo Datasheet4U.com

XRA1201P - 16-BIT I2C/SMBUS GPIO EXPANDER

This page provides the datasheet information for the XRA1201P, a member of the XRA1201 16-BIT I2C/SMBUS GPIO EXPANDER family.

Description

The XRA1201/1201P is a 16-bit GPIO expander with an I2C/SMBus interface.

After power-up, the XRA1201 has internal 100K ohm pull-up resistors on each I/O pin that can be individually enabled.

Features

  • 1.65V to 3.6V operating voltage.
  • 16 General Purpose I/Os (GPIOs).
  • 5V tolerant inputs.
  • Maximum stand-by current of 1uA at +1.8V.
  • I2C/SMBus bus interface.
  • I2C clock frequency up to 400kHz.
  • Noise filter on SDA and SCL inputs.
  • Up to 32 I2C Slave Addresses.
  • Individually programmable inputs.
  • Internal pull-up resistors.
  • Polarity inversion.
  • Individual interrupt enable.
  • Rising edge and/or Falling edge interrupt.

📥 Download Datasheet

Datasheet preview – XRA1201P

Datasheet Details

Part number XRA1201P
Manufacturer Exar
File Size 224.06 KB
Description 16-BIT I2C/SMBUS GPIO EXPANDER
Datasheet download datasheet XRA1201P Datasheet
Additional preview pages of the XRA1201P datasheet.

📁 Similar Datasheet

  • XRA1201P - 16-BIT I2C / SMBUS GPIO EXPANDER (MaxLinear)
  • XRA1201 - 16-BIT I2C / SMBUS GPIO EXPANDER (MaxLinear)
  • XRA10324AF - Quad Operational Amplifiers (ETC)
  • XRA1402 - 8-Bit SPI GPIO Expander (MaxLinear)
  • XRA1403 - 16-Bit SPI GPIO Expander (MaxLinear)
  • XRA1404 - 8-Bit SPI GPIO Expander (MaxLinear)
  • XRA00 - UHF/ EPCglobal/ Contactless Memory IC 96 bit ePC with Inventory and Kill Function (STMicroelectronics)
  • XRAG2 - Contactless Memory (ST Microelectronics)
Other Datasheets by Exar
  • XRA1201 - 16-BIT I2C/SMBUS GPIO EXPANDER
  • XRA1200 - 8-BIT I2C/SMBUS GPIO EXPANDER
  • XRA1200P - 8-BIT I2C/SMBUS GPIO EXPANDER
  • XRA1202 - 8-BIT I2C/SMBUS GPIO EXPANDER
  • XRA1202P - 8-BIT I2C/SMBUS GPIO EXPANDER
  • XRA1203 - 16-BIT I2C/SMBUS GPIO EXPANDER
  • XRA1206 - 8-BIT I2C/SMBUS GPIO EXPANDER
  • XRA1207 - 16-BIT I2C/SMBUS GPIO EXPANDER

Full PDF Text Transcription

Click to expand full text
XRA1201/1201P 16-BIT I2C/SMBUS GPIO EXPANDER SEPTEMBER 2011 REV. 1.0.0 GENERAL DESCRIPTION The XRA1201/1201P is a 16-bit GPIO expander with an I2C/SMBus interface. After power-up, the XRA1201 has internal 100K ohm pull-up resistors on each I/O pin that can be individually enabled. The XRA1201P has the internal pull-up resistors enabled upon power-up in case it is necessary for the inputs to be in a known state. In addition, the GPIOs on the XRA1201/1201P can individually be controlled and configured. As outputs, the GPIOs can be outputs that are high, low or in three-state mode. The three-state mode feature is useful for applications where the power is removed from the remote devices, but they may still be connected to the GPIO expander.
Published: |