Datasheet4U Logo Datasheet4U.com

XRA1402 - 8-Bit SPI GPIO Expander

Description

The XRA1402 is an 8-bit GPIO expander with an SPI interface.

After power-up, the XRA1402 has internal 100K ohm pull-up resistors on each I/O pin that can be individually enabled.

In addition, the GPIOs on the XRA1402 can individually be controlled and configured.

Features

  • 1.65V to 3.6V operating voltage.
  • 8 General Purpose I/Os (GPIOs).
  • 5V tolerant inputs.
  • Maximum stand-by current of 1uA at +1.8V.
  • SPI bus interface.
  • SPI Clock Frequency up to 26MHz.
  • Individually programmable inputs.
  • Internal pull-up resistors.
  • Polarity inversion.
  • Individual interrupt enable.
  • Rising edge and/or Falling edge interrupt.
  • Input filter.
  • Individually programmable outputs.
  • Output Level Control.
  • Output Three-State C.

📥 Download Datasheet

Datasheet preview – XRA1402

Datasheet Details

Part number XRA1402
Manufacturer MaxLinear
File Size 1.19 MB
Description 8-Bit SPI GPIO Expander
Datasheet download datasheet XRA1402 Datasheet
Additional preview pages of the XRA1402 datasheet.

📁 Similar Datasheet

  • XRA1402 - 8-BIT SPI GPIO EXPANDER (Exar)
  • XRA1403 - 16-BIT SPI GPIO EXPANDER (Exar)
  • XRA1404 - 8-BIT SPI GPIO EXPANDER (Exar)
  • XRA1405 - 16-BIT SPI GPIO EXPANDER (Exar)
  • XRA10324AF - Quad Operational Amplifiers (ETC)
  • XRA1200 - 8-BIT I2C/SMBUS GPIO EXPANDER (Exar)
  • XRA1200P - 8-BIT I2C/SMBUS GPIO EXPANDER (Exar)
  • XRA1201 - 16-BIT I2C/SMBUS GPIO EXPANDER (Exar)
  • XRA1201P - 16-BIT I2C/SMBUS GPIO EXPANDER (Exar)
  • XRA1202 - 8-BIT I2C/SMBUS GPIO EXPANDER (Exar)
Other Datasheets by MaxLinear
  • XRA1403 - 16-Bit SPI GPIO Expander
  • XRA1404 - 8-Bit SPI GPIO Expander
  • XRA1201 - 16-BIT I2C / SMBUS GPIO EXPANDER
  • XRA1201P - 16-BIT I2C / SMBUS GPIO EXPANDER

Full PDF Text Transcription

Click to expand full text
XRA1402 8-Bit SPI GPIO Expander February 2, 2022 Rev. 1.0.2 GENERAL DESCRIPTION The XRA1402 is an 8-bit GPIO expander with an SPI interface. After power-up, the XRA1402 has internal 100K ohm pull-up resistors on each I/O pin that can be individually enabled. In addition, the GPIOs on the XRA1402 can individually be controlled and configured. As outputs, the GPIOs can be outputs that are high, low or in three-state mode. The three-state mode feature is useful for applications where the power is removed from the remote devices, but they may still be connected to the GPIO expander. As inputs, the internal pull-up resistors can be enabled or disabled and the input polarity can be inverted. The interrupt can be programmed for different behaviors.
Published: |