Datasheet4U Logo Datasheet4U.com

XRA1404 - 8-BIT SPI GPIO EXPANDER

Description

The XRA1404 is an 8-bit GPIO expander with an SPI interface.

After power-up, the XRA1404 has internal 100K ohm pull-up resistors on each I/O pin that can be individually enabled.

In addition, the GPIOs on the XRA1404 can individually be controlled and configured.

Features

  • 1.65V to 3.6V operating voltage.
  • Integrated level shifters.
  • 8 General Purpose I/Os (GPIOs).
  • 5V tolerant inputs.
  • Maximum stand-by current of 1uA at +1.8V.
  • SPI bus interface.
  • SPI Clock Frequency up to 26MHz.
  • Individually programmable inputs.
  • Internal pull-up resistors.
  • Polarity inversion.
  • Individual interrupt enable.
  • Rising edge and/or Falling edge interrupt.
  • Input filter.
  • Individually programmab.

📥 Download Datasheet

Datasheet preview – XRA1404

Datasheet Details

Part number XRA1404
Manufacturer Exar
File Size 207.71 KB
Description 8-BIT SPI GPIO EXPANDER
Datasheet download datasheet XRA1404 Datasheet
Additional preview pages of the XRA1404 datasheet.

📁 Similar Datasheet

  • XRA1404 - 8-Bit SPI GPIO Expander (MaxLinear)
  • XRA1402 - 8-Bit SPI GPIO Expander (MaxLinear)
  • XRA1403 - 16-Bit SPI GPIO Expander (MaxLinear)
  • XRA10324AF - Quad Operational Amplifiers (ETC)
  • XRA1201 - 16-BIT I2C / SMBUS GPIO EXPANDER (MaxLinear)
  • XRA1201P - 16-BIT I2C / SMBUS GPIO EXPANDER (MaxLinear)
  • XRA00 - UHF/ EPCglobal/ Contactless Memory IC 96 bit ePC with Inventory and Kill Function (STMicroelectronics)
  • XRAG2 - Contactless Memory (ST Microelectronics)
Other Datasheets by Exar
  • XRA1402 - 8-BIT SPI GPIO EXPANDER
  • XRA1403 - 16-BIT SPI GPIO EXPANDER
  • XRA1405 - 16-BIT SPI GPIO EXPANDER
  • XRA1200 - 8-BIT I2C/SMBUS GPIO EXPANDER
  • XRA1200P - 8-BIT I2C/SMBUS GPIO EXPANDER
  • XRA1201 - 16-BIT I2C/SMBUS GPIO EXPANDER
  • XRA1201P - 16-BIT I2C/SMBUS GPIO EXPANDER
  • XRA1202 - 8-BIT I2C/SMBUS GPIO EXPANDER

Full PDF Text Transcription

Click to expand full text
XRA1404 8-BIT SPI GPIO EXPANDER WITH INTEGRATED LEVEL SHIFTERS SEPTEMBER 2011 REV. 1.0.0 GENERAL DESCRIPTION The XRA1404 is an 8-bit GPIO expander with an SPI interface. After power-up, the XRA1404 has internal 100K ohm pull-up resistors on each I/O pin that can be individually enabled. In addition, the GPIOs on the XRA1404 can individually be controlled and configured. As outputs, the GPIOs can be outputs that are high, low or in three-state mode. The three-state mode feature is useful for applications where the power is removed from the remote devices, but they may still be connected to the GPIO expander. As inputs, the internal pull-up resistors can be enabled or disabled and the input polarity can be inverted. The interrupt can be programmed for different behaviors.
Published: |