Datasheet4U Logo Datasheet4U.com

HIP9021 - Portable Battery Drive/Torque Controller for N-Channel MOSFETs in Motor Control Systems

Description

The HIP9021IB is a dedicated Power MOSFET driver which drives a DC motor.

As a system, motor speed is controlled while controlling torque.

The primary application is drive control for portable drills while providing overload protection.

Features

  • MOSFET Driver and DC Motor Controller.
  • Torque Control and Overload Protection.
  • Battery Power Supply.
  • . +5V to +15V.
  • BiMOS IC with Low Operating Current - Maximum Supply Current.
  • . .1.5mA - Maximum Input Leakage Currents.
  • 1.5µA.
  • 500µA Maximum Supply Current.
  • 1µA Maximum Input Leakage Currents.
  • Typical Oscillator Frequency.
  • . . 5kHz.

📥 Download Datasheet

Datasheet Details

Part number HIP9021
Manufacturer Intersil (Renesas)
File Size 59.28 KB
Description Portable Battery Drive/Torque Controller for N-Channel MOSFETs in Motor Control Systems
Datasheet download datasheet HIP9021 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HIP9010 Engine Knock Signal Processor Renesas
HIP9011 Engine Knock Signal Processor Renesas
HIP0045 1A/50V Octal Low Side Power Driver Renesas
HIP0050 0.3A/50V Octal Low Side Power Driver Renesas
HIP0051 0.25A/50V Octal Low Side Power Driver Renesas

Other Datasheets by Intersil (Renesas)

Part Number Description
HIP9020 Programmable Quad Buffer with Pre and Post Scaler Dividers
HIP9022 Dual High Speed Laser Driver
HIP0063 Hex Low Side MOSFET Driver with Serial or Parallel Interface and Diagnostic Fault Control
HIP1030 1A High Side Driver with Overload Protection
HIP1031 Half Amp High Side Driver with Overload Protection

Full PDF Text Transcription

Click to expand full text
HIP9021 PRELIMINARY August 1996 Portable Battery Drive/Torque Controller for N-Channel MOSFETs in Motor Control Systems Description The HIP9021IB is a dedicated Power MOSFET driver which drives a DC motor. As a system, motor speed is controlled while controlling torque. The primary application is drive control for portable drills while providing overload protection. The main function of the HIP9021IB is to produce a pulse width modulated square wave signal which drives the gate of an N-Channel Power MOSFET. The duty-cycle is determined by the setting of an external potentiometer at the TRIGGER (speed control) input. As the TRIGGER voltage level is decreased the duty-cycle of the square wave and the speed of the motor is increased.
Published: |