LMV118 - Low Voltage / 45MHz / Rail-to-Rail Output Operational Amplifiers with Shutdown Option

National Semiconductor

The LMV118 by National Semiconductor is a Low Voltage / 45MHz / Rail-to-Rail Output Operational Amplifiers with Shutdown Option. Below is the official datasheet preview.

📥 Download Datasheet

LMV118 Low Voltage / 45MHz / Rail-to-Rail Output Operational Amplifiers with Shutdown Option by National Semiconductor - Datasheet Preview — Official preview page of the **LMV118** Low Voltage / 45MHz / Rail-to-Rail Output Operational Amplifiers with Shutdown Option datasheet (National Semiconductor).

Datasheet Details

Part number	LMV118
Manufacturer	National Semiconductor
File Size	416.39 KB
Description	Low Voltage / 45MHz / Rail-to-Rail Output Operational Amplifiers with Shutdown Option
Datasheet	LMV118_NationalSemiconductor.pdf
Additional preview pages of the LMV118 datasheet.

LMV118 Product details

Description

The LMV116 (single) rail-to-rail output voltage feedback amplifiers offer high speed (45MHz), and low voltage operation (2.7V) in addition to micro-power shutdown capability (LMV118).

Features

(VS = 2.7V, TA = 25˚C, RL = 1kΩ to V+/2, AV = +1. Typical values unless specified). n.
3dB BW 45MHz n Supply voltage range 2.7V to 12V n Slew rate 40V/µs n Supply current 600µA n Power down supply current 15µA n Output short circuit current 32mA ± 20mA n Linear output current n Input common mode voltage.
0.3V to 1.7V n Output voltage swing 20mV from rails n Input voltage noise 40nV/ n Input current noise 0.75pA/.

📁 LMV118 Similar Datasheet

LMV112 - LMV112 40 MHz Dual Clock Buffer (Rev. B) (ETCTI)
LMV116 - LMV116/LMV118 Low Voltage 45MHz Rail-to-Rail Output Op Amp w/Shutdown Option (Rev. B) (ETCTI)
LMV1012 - LMV1012 Analog Series: Pre-Amplified IC for High Gain 2-Wire Microphones (Rev. H) (ETCTI)
LMV1015 - LMV1015 Analog Series: Built-in Gain IC for High Sensitivity 2-Wire Microphone (Rev. B) (ETCTI)
LMV1024 - PDM Output with Pre-Amplifier (Texas Instruments)
LMV1026 - PDM Output with Pre-Amplifier (Texas Instruments)
LMV1031 - LMV1031-20 Amp for Internal 3-Wire Analog Microphones External Preamp (Rev. B) (ETCTI)
LMV1032 - LMV1032-06/LMV1032-15/LMV1032-25 Amps for 3-Wire Analog Electret Microphones (Rev. G) (ETCTI)

Other Datasheets by National Semiconductor

LMV110 - Fixed-Gain Amplifiers
LMV111 - Operational Amplifier with Bias Network
LMV115 - GSM Baseband 30MHz 2.8V Oscillator Buffer
LMV101 - Fixed-Gain Amplifiers
LMV102 - Fixed-Gain Amplifiers
LMV1022 - PDM Output Pre-Amplifier

Published: Apr 25, 2005 |