LMV1026, LMV1024 - PDM Output with Pre-Amplifier

Texas Instruments

The LMV1026 by Texas Instruments is a PDM Output with Pre-Amplifier. Below is the official datasheet preview.

Datasheet Details

Part number	LMV1026, LMV1024
Manufacturer	Texas Instruments
File Size	741.07 KB
Description	PDM Output with Pre-Amplifier
Datasheet	LMV1024-etcTI.pdf
Note	This datasheet PDF includes multiple part numbers: LMV1026, LMV1024. Please refer to the document for exact specifications by model.
Additional preview pages of the LMV1026 datasheet.

National’s LMV1024 and LMV1026 stereo amplifiers are solutions for the new generation of voice enrichment capabilities.

1.
2 (Typical VDD = 1.8V, CLOCK = 1.2 MHz, fINPUT = 1 kHz, VINPUT = 18 mVPP, unless otherwise specified).
Enhanced high-performance, full PDM output from the element.
Stereo chipset and array routing.
SNR A-weighted 59 dB.
Digital A-weighted noise floor.
89 dBFS.
Supply current 518 µA.
Clock frequency 400 kHz to 2.4 MHz.
Total harmonic distortion 0.03%.
Power supply rejection ratio 100 dB.
Adhesion t.

📁 LMV1026 Similar Datasheet

LMV102 - Fixed-Gain Amplifiers (National Semiconductor)
LMV1022 - PDM Output Pre-Amplifier (National Semiconductor)
LMV1023 - PDM Output Pre-Amplifier (National Semiconductor)
LMV1024 - (LMV1024 / LMV1026) PDM Output (National Semiconductor)
LMV101 - Fixed-Gain Amplifiers (National Semiconductor)
LMV1012 - LMV1012 Analog Series: Pre-Amplified IC for High Gain 2-Wire Microphones (Rev. H) (ETCTI)
LMV1015 - LMV1015 Analog Series: Built-in Gain IC for High Sensitivity 2-Wire Microphone (Rev. B) (ETCTI)
LMV1031 - LMV1031-20 Amp for Internal 3-Wire Analog Microphones External Preamp (Rev. B) (ETCTI)

Other Datasheets by Texas Instruments

Published: Aug 23, 2019 |