LMV1024 - PDM Output with Pre-Amplifier

Name: LMV1024
SKU: LMV1024-1398677

Texas Instruments

The LMV1024 by Texas Instruments is a PDM Output with Pre-Amplifier. Below is the official datasheet preview.

Datasheet Details

Part number	LMV1024
Manufacturer	Texas Instruments
File Size	741.07 KB
Description	PDM Output with Pre-Amplifier
Datasheet	LMV1024-etcTI.pdf
Additional preview pages of the LMV1024 datasheet.

National’s LMV1024 and LMV1026 stereo amplifiers are solutions for the new generation of voice enrichment capabilities.

1.
2 (Typical VDD = 1.8V, CLOCK = 1.2 MHz, fINPUT = 1 kHz, VINPUT = 18 mVPP, unless otherwise specified).
Enhanced high-performance, full PDM output from the element.
Stereo chipset and array routing.
SNR A-weighted 59 dB.
Digital A-weighted noise floor.
89 dBFS.
Supply current 518 µA.
Clock frequency 400 kHz to 2.4 MHz.
Total harmonic distortion 0.03%.
Power supply rejection ratio 100 dB.
Adhesion t.

📁 LMV1024 Similar Datasheet

LMV102 - Fixed-Gain Amplifiers (National Semiconductor)
LMV1022 - PDM Output Pre-Amplifier (National Semiconductor)
LMV1023 - PDM Output Pre-Amplifier (National Semiconductor)
LMV1026 - (LMV1024 / LMV1026) PDM Output (National Semiconductor)
LMV101 - Fixed-Gain Amplifiers (National Semiconductor)
LMV1012 - LMV1012 Analog Series: Pre-Amplified IC for High Gain 2-Wire Microphones (Rev. H) (ETCTI)
LMV1015 - LMV1015 Analog Series: Built-in Gain IC for High Sensitivity 2-Wire Microphone (Rev. B) (ETCTI)
LMV1031 - LMV1031-20 Amp for Internal 3-Wire Analog Microphones External Preamp (Rev. B) (ETCTI)

Other Datasheets by Texas Instruments

Published: Aug 23, 2019 |