LMV1032-15, LMV1032-06 - Amplifiers

Name: LMV1032-15
SKU: LMV1032-15-581569

National Semiconductor

The LMV1032-15 by National Semiconductor is a Amplifiers. Below is the official datasheet preview.

Datasheet Details

Part number	LMV1032-15, LMV1032-06
Manufacturer	National Semiconductor
File Size	406.30 KB
Description	Amplifiers
Datasheet	LMV1032-06_NationalSemiconductor.pdf
Note	This datasheet PDF includes multiple part numbers: LMV1032-15, LMV1032-06. Please refer to the document for exact specifications by model.
Additional preview pages of the LMV1032-15 datasheet.

The LMV1032 is an audio amplifier series for small form factor electret microphones.

(Typical LMV1032-06, 1.7V Supply; Unless Otherwise Noted) n Output voltage noise (A-weighted).
97 dBV n Low supply current 60 µA n Supply voltage 1.7V to 5V n PSRR 84 dB n Signal to noise ratio 58 dB n Input capacitance 2 pF > 100 MΩ n Input impedance < 200Ω n Output impedance n Max input signal 300 mVPP n Temperature range.
40˚C to 85˚C n Offered in 1.13 x 1.13 x 0.4mm Ultra Thin micro SMD lead free (NOPB) package.

📁 LMV1032-15 Similar Datasheet

LMV1032 - LMV1032-06/LMV1032-15/LMV1032-25 Amps for 3-Wire Analog Electret Microphones (Rev. G) (ETCTI)
LMV1031 - LMV1031-20 Amp for Internal 3-Wire Analog Microphones External Preamp (Rev. B) (ETCTI)
LMV1012 - LMV1012 Analog Series: Pre-Amplified IC for High Gain 2-Wire Microphones (Rev. H) (ETCTI)
LMV1015 - LMV1015 Analog Series: Built-in Gain IC for High Sensitivity 2-Wire Microphone (Rev. B) (ETCTI)
LMV1024 - PDM Output with Pre-Amplifier (Texas Instruments)
LMV1026 - PDM Output with Pre-Amplifier (Texas Instruments)
LMV1088 - Dual Input Far Field Noise Suppression Microphone Amp w/Auto Cal (Rev. J) (ETCTI)
LMV1089 - Dual Input Far Field Noise Suppression Microphone Amp w/ Auto Calibration (Rev. H) (ETCTI)

Other Datasheets by National Semiconductor

Published: May 10, 2007 |