Datasheet4U Logo Datasheet4U.com

HD74ALVCH162334 - 16-bit Universal Bus Driver with 3-state Outputs

General Description

This HD74ALVCH162334 is a 16-bit universal bus driver is designed for 2.3 V to 3.6 V VCC operation.

Data flow from A to Y is controlled by the output enable (O E) input.

The device operates in the transparent mode when the latch enable (LE) input is low.

Key Features

  • VCC = 2.3 V to 3.6 V.
  • Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C).
  • Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C).
  • High output current ±12 mA (@VCC = 3.0 V).
  • Bus hold on data inputs eliminates the need for external pullup / pulldown resistors.
  • All outputs have equivalent 26 Ω series resistors, so no external resistors are required HD74ALVCH162334 Function Table Inputs OE H L L L L L LE X L L H H H CLK X X X ↑ ↑ L o.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HD74ALVCH162334 16-bit Universal Bus Driver with 3-state Outputs ADE-205-210 (Z) Preliminary 1st. Edition December 1997 Description This HD74ALVCH162334 is a 16-bit universal bus driver is designed for 2.3 V to 3.6 V VCC operation. Data flow from A to Y is controlled by the output enable (O E) input. The device operates in the transparent mode when the latch enable (LE) input is low. When LE is high, the A data is latched if the clock (CLK) input is held at a high or low logic level. If LE is high, the A data is stored in the latch/flip flop on the low to high transition of CLK. When OE is high, the outputs are in the high impedance state.