PI3HDMI1210 Datasheet | Pericom Semiconductor

Features - 4-Differential Channel 2:1 Mux/De Mux + 2-Channel 2:1 Mux/De Mux - DVI, HDMITM 1.1, 1.2 and 1.3 signal patible - Data Rate support beyond 3.3Gbps on high speed data chan- nels - Supports both AC coupled and DC coupled signals - Switching speed: 4ns - Isolation: -40d B@1GHz for high-speed channels - Integrated ESD protection - High-speed data bits: 12k V HBM 8k V contact - Side band signal bits: 2k V HBM - Low bit-to-bit skew - Enable/Disable time: 9ns - Bidirectional - Packaging (Pb-free & Green): - 48-pin BQSOP (B) Block Diagram 4- Dx A 4- Dx B 2 x B1 2 x B2 Dx Ax Description Peri Semiconductor’s PI3HDMITM series of switch circuits are targeted for high-resolution video networks that are based on DVI/HDMITM standards, and TMDS signal processing. The PI3HDMI1210 is a 2-to-1 HDMITM Mux/De Mux Switch. The device multiplexes differential signals to one of two corresponding HDMITM inputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bitto-bit skew and high channel-to-channel noise isolation. The maximum DVI/HDMITM data rate of 4.0Gbps provides the resolution required by the next generation HDTV and PC graphics. Three differential channels are used for data (video signals for DVI or audio/video signals for HDMITM), and one differential channel is used for Clock for decoding the TMDS signals at the outputs. Because of its passive bidirectional feature , this switch can be used either at the video drivers side or at the receiver side. For PC graphics applications, the device sits at the drivers side to switch between multiple display units such as PC LCD monitor, projector, TV, etc. For consumer video applications, the device sits at the receiver end to switch between the source ponents such as DVD, D-VHS, STB, etc. Pin Description VDD33 CP D0+ D0D1+ D1VDD33 SEL D2+ D2D3+ D3- VDD33 GND CP GND A0 GND A1 IN VDD50 EN CP 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23...