PI3HDMI301 Datasheet | Pericom Semiconductor

ADVANCE INFORMATION - PANY CONFIDENTIAL 3:1 Active Switch for HDMI™ Signals with Optimized Equalization for Enhanced Signal Integrity Features - Supply voltage, VDD = 3.3V ±5% - Each of the three input ports can support HDMI™ or DVI signals - Supports both AC-coupled and DC-coupled inputs - Supports Deep Color™ - High Performance, up to 2.5 Gbps per channel - Switching support for 3 side band signals (SCL, SDA and HPD) - 5V Tolerance on all side band signals - SCL, SDA, and HPD pins are the only pins that can support HOT INSERTION - Integrated 50-ohm (±10%) termination resistors at each high speed signal input - TMDS input termination control on all high speed inputs - HDCP reset circuitry for quick munication when switching from one port to another - Configurable output swing control - Configurable Pre-Emphasis levels - Configurable De-Emphasis - Optimized Equalization Single default setting will support all cable lengths - 8k V Contact ESD protection on all input data/clock channels per IEC61000-4-2 - Propagation delay ≤ 2ns - High Impedance Outputs when disabled - Packaging (Pb-free & Green): - 80-pin LQFP (FF80) - 64-pin TQFN (ZL64) Description Peri Semiconductor’s PI3HDMI301 3:1 active switch circuit is targeted for high-resolution video networks that are based on DVI/HDMI™ standards and TMDS signal processing. The PI3HDMI301 is an active 3 TMDS to 1 TMDS receiver switch with Hi-Z outputs. The device receives differential signals from selected video ponents and drives the video display unit. It provides controllable output swings, as well as provides a unique advanced pre-emphasis technique to increase rise and fall times which are reduced during transmission across long...