http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




Analog Devices Semiconductor Electronic Components Datasheet

AD5343 Datasheet

Parallel Interface Dual Voltage-Output 8-/10-/12-Bit DACs

No Preview Available !

AD5343 pdf
a 2.5 V to 5.5 V, 230 A, Parallel Interface
Dual Voltage-Output 8-/10-/12-Bit DACs
AD5332/AD5333/AD5342/AD5343*
FEATURES
AD5332: Dual 8-Bit DAC in 20-Lead TSSOP
AD5333: Dual 10-Bit DAC in 24-Lead TSSOP
AD5342: Dual 12-Bit DAC in 28-Lead TSSOP
AD5343: Dual 12-Bit DAC in 20-Lead TSSOP
Low Power Operation: 230 A @ 3 V, 300 A @ 5 V
via PD Pin
Power-Down to 80 nA @ 3 V, 200 nA @ 5 V
2.5 V to 5.5 V Power Supply
Double-Buffered Input Logic
Guaranteed Monotonic by Design Over All Codes
Buffered/Unbuffered Reference Input Options
Output Range: 0–VREF or 0–2 VREF
Power-On Reset to Zero Volts
Simultaneous Update of DAC Outputs via LDAC Pin
Asynchronous CLR Facility
Low Power Parallel Data Interface
On-Chip Rail-to-Rail Output Buffer Amplifiers
Temperature Range: –40؇C to +105؇C
APPLICATIONS
Portable Battery-Powered Instruments
Digital Gain and Offset Adjustment
Programmable Voltage and Current Sources
Programmable Attenuators
Industrial Process Control
GENERAL DESCRIPTION
The AD5332/AD5333/AD5342/AD5343 are dual 8-, 10-, and
12-bit DACs. They operate from a 2.5 V to 5.5 V supply con-
suming just 230 µA at 3 V, and feature a power-down pin, PD
that further reduces the current to 80 nA. These devices incor-
porate an on-chip output buffer that can drive the output to
both supply rails, while the AD5333 and AD5342 allow a choice
of buffered or unbuffered reference input.
The AD5332/AD5333/AD5342/AD5343 have a parallel interface.
CS selects the device and data is loaded into the input registers
on the rising edge of WR.
The GAIN pin on the AD5333 and AD5342 allows the output
range to be set at 0 V to VREF or 0 V to 2 × VREF.
Input data to the DACs is double-buffered, allowing simultaneous
update of multiple DACs in a system using the LDAC pin.
An asynchronous CLR input is also provided, which resets the
contents of the Input Register and the DAC Register to all zeros.
These devices also incorporate a power-on reset circuit that ensures
that the DAC output powers on to 0 V and remains there until
valid data is written to the device.
The AD5332/AD5333/AD5342/AD5343 are available in Thin
Shrink Small Outline Packages (TSSOP).
AD5332 FUNCTIONAL BLOCK DIAGRAM
(Other Diagrams Inside)
VREFA
VDD
DB... 7
DB0
CS
WR
A0
CLR
LDAC
INTER-
FACE
LOGIC
POWER-ON
RESET
INPUT
REGISTER
DAC
REGISTER
INPUT
REGISTER
DAC
REGISTER
8-BIT
DAC
8-BIT
DAC
RESET
VREFB
AD5332
BUFFER
VOUTA
BUFFER
VOUTB
POWER-DOWN
LOGIC
PD GND
*Protected by U.S. Patent Number 5,969,657.
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700 World Wide Web Site: http://www.analog.com
Fax: 781/326-8703
© Analog Devices, Inc., 2000


Analog Devices Semiconductor Electronic Components Datasheet

AD5343 Datasheet

Parallel Interface Dual Voltage-Output 8-/10-/12-Bit DACs

No Preview Available !

AD5343 pdf
AD5332/AD5333/AD5342/AD5343–SPECIFICATIONS
(VDD = 2.5 V to 5.5 V, VREF = 2 V. RL = 2 kto GND; CL =200 pF to GND; all specifications TMIN to TMAX unless otherwise noted.)
Parameter1
B Version2
Min Typ Max
Unit
Conditions/Comments
DC PERFORMANCE3, 4
AD5332
Resolution
Relative Accuracy
Differential Nonlinearity
AD5333
Resolution
Relative Accuracy
Differential Nonlinearity
AD5342/AD5343
Resolution
Relative Accuracy
Differential Nonlinearity
Offset Error
Gain Error
Lower Deadband5
Upper Deadband
Offset Error Drift6
Gain Error Drift6
DC Power Supply Rejection Ratio6
DC Crosstalk6
8
± 0.15
± 0.02
10
± 0.5
± 0.05
12
±2
± 0.2
± 0.4
± 0.15
10
10
–12
–5
–60
200
±1
± 0.25
±4
± 0.5
± 16
±1
±3
±1
60
60
Bits
LSB
LSB Guaranteed Monotonic By Design Over All Codes
Bits
LSB
LSB Guaranteed Monotonic By Design Over All Codes
Bits
LSB
LSB
% of FSR
% of FSR
mV
mV
ppm of FSR/°C
ppm of FSR/°C
dB
µV
Guaranteed Monotonic By Design Over All Codes
Lower Deadband Exists Only if Offset Error Is Negative
VDD = 5 V. Upper Deadband Exists Only if VREF = VDD
VDD = ± 10%
RL = 2 kto GND, 2 kto VDD; CL = 200 pF to GND;
Gain = 0
DAC REFERENCE INPUT6
VREF Input Range
VREF Input Impedance
Reference Feedthrough
Channel-to-Channel Isolation
1 VDD
0.25
VDD
>10
180
90
–90
–90
V
V
M
k
k
dB
dB
Buffered Reference (AD5333 and AD5342)
Unbuffered Reference
Buffered Reference (AD5333 and AD5342)
Unbuffered Reference. Gain = 1, Input Impedance = RDAC
Unbuffered Reference. Gain = 2, Input Impedance = RDAC
Frequency = 10 kHz
Frequency = 10 kHz (AD5332, AD5333, and AD5342)
OUTPUT CHARACTERISTICS6
Minimum Output Voltage4, 7
Maximum Output Voltage4, 7
DC Output Impedance
Short Circuit Current
Power-Up Time
LOGIC INPUTS6
Input Current
VIL, Input Low Voltage
VIH, Input High Voltage
Pin Capacitance
0.001
VDD – 0.001
0.5
25
16
2.5
5
±1
0.8
0.6
0.5
2.4
2.1
2.0
3.5
V min
V max
mA
mA
µs
µs
µA
V
V
V
V
V
V
pF
Rail-to-Rail Operation
VDD = 5 V
VDD = 3 V
Coming Out of Power-Down Mode. VDD = 5 V
Coming Out of Power-Down Mode. VDD = 3 V
VDD = 5 V ± 10%
VDD = 3 V ± 10%
VDD = 2.5 V
VDD = 5 V ± 10%
VDD = 3 V ± 10%
VDD = 2.5 V
POWER REQUIREMENTS
VDD
IDD (Normal Mode)
VDD = 4.5 V to 5.5 V
VDD = 2.5 V to 3.6 V
IDD (Power-Down Mode)
VDD = 4.5 V to 5.5 V
VDD = 2.5 V to 3.6 V
2.5 5.5
300 450
230 350
0.2 1
0.08 1
V
µA
µA
µA
µA
All DACs active and excluding load currents
Unbuffered Reference. VIH = VDD, VIL = GND.
IDD increases by 50 µA at VREF > VDD – 100 mV.
In Buffered Mode extra current is (5 +VREF/RDAC) µA.
NOTES
1See Terminology section.
2Temperature range: B Version: –40°C to +105°C; typical specifications are at 25°C.
3Linearity is tested using a reduced code range: AD5332 (Code 8 to 255); AD5333 (Code 28 to 1023); AD5342/AD5343 (Code 115 to 4095).
4DC specifications tested with outputs unloaded.
5This corresponds to x codes. x = Deadband voltage/LSB size.
6Guaranteed by design and characterization, not production tested.
7In order for the amplifier output to reach its minimum voltage, Offset Error must be negative. In order for the amplifier output to reach its maximum voltage, V REF = VDD and
“Offset plus Gain” Error must be positive.
Specifications subject to change without notice.
–2– REV. 0


Part Number AD5343
Description Parallel Interface Dual Voltage-Output 8-/10-/12-Bit DACs
Maker Analog Devices
Total Page 20 Pages
PDF Download
AD5343 pdf
Download PDF File
AD5343 pdf
View for Mobile



Buy Electronic Components




Related Datasheet

1 AD534 Internally Trimmed Precision IC Multiplier Analog Devices
Analog Devices
AD534 pdf
2 AD5340 Parallel Interface Single Voltage-Output 8-/10-/12-Bit DACs Analog Devices
Analog Devices
AD5340 pdf
3 AD5341 Parallel Interface Single Voltage-Output 8-/10-/12-Bit DACs Analog Devices
Analog Devices
AD5341 pdf
4 AD5342 Parallel Interface Dual Voltage-Output 8-/10-/12-Bit DACs Analog Devices
Analog Devices
AD5342 pdf
5 AD5343 Parallel Interface Dual Voltage-Output 8-/10-/12-Bit DACs Analog Devices
Analog Devices
AD5343 pdf
6 AD5344 Parallel Interface Quad Voltage-Output 8-/10-/12-Bit DACs Analog Devices
Analog Devices
AD5344 pdf
7 AD5346 Parallel Interface Octal Voltage Output 8-/10-/12-Bit DACs Analog Devices
Analog Devices
AD5346 pdf
8 AD5347 Parallel Interface Octal Voltage Output 8-/10-/12-Bit DACs Analog Devices
Analog Devices
AD5347 pdf
9 AD5348 Parallel Interface Octal Voltage Output 8-/10-/12-Bit DACs Analog Devices
Analog Devices
AD5348 pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components