http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




Analog Devices Semiconductor Electronic Components Datasheet

AD534 Datasheet

Internally Trimmed Precision IC Multiplier

No Preview Available !

AD534 pdf
Data Sheet
FEATURES
Pretrimmed to ±0.25% maximum 4-quadrant error (AD534L)
All inputs (X, Y, and Z) differential, high impedance for
[(X1 − X2)(Y1 − Y2)/10 V] + Z2 transfer function
Scale factor adjustable to provide up to ×100 gain
Low noise design: 90 μV rms, 10 Hz to10 kHz
Low cost, monolithic construction
Excellent long-term stability
APPLICATIONS
High quality analog signal processing
Differential ratio and percentage computations
Algebraic and trigonometric function synthesis
Wideband, high crest rms-to-dc conversion
Accurate voltage controlled oscillators and filters
Available in chip form
GENERAL DESCRIPTION
The AD534 is a monolithic laser trimmed four-quadrant multi-
plier divider having accuracy specifications previously found
only in expensive hybrid or modular products. A maximum
multiplication error of ±0.25% is guaranteed for the AD534L
without any external trimming. Excellent supply rejection, low
temperature coefficients and long-term stability of the on-chip
thin film resistors and buried Zener reference preserve accuracy
even under adverse conditions of use. It is the first multiplier to
offer fully differential, high impedance operation on all inputs,
including the Z input, a feature that greatly increases its flexibility
and ease of use. The scale factor is pretrimmed to the standard
value of 10.00 V; by means of an external resistor, this can be
reduced to values as low as 3 V.
Internally Trimmed
Precision IC Multiplier
AD534
FUNCTIONAL BLOCK DIAGRAM
STABLE
SF REFERENCE
AND BIAS
+VS
–VS
TRANSFER FUNCTION
X1
X2
V-TO-1
TRANSLINEAR
VOUT = A
(X1 – X2) (Y1 – Y2)
SF
– (Z1 – Z2)
MULTIPLIER
Y1
V-TO-1
ELEMENT
Y2 A OUT
Z1
V-TO-1
Z2
0.75 ATTEN
HIGH GAIN
OUTPUT
AMPLIFIER
Figure 1.
The wide spectrum of applications and the availability of several
grades commend this multiplier as the first choice for all new
designs. The AD534J (±1% maximum error), AD534K (±0.5%
maximum), and AD534L (±0.25% maximum) are specified for
operation over the 0°C to +70°C temperature range. The AD534S
(±1% maximum) and AD534T (±0.5% maximum) are specified
over the extended temperature range, −55°C to +125°C. All
grades are available in hermetically sealed TO-100 metal cans
and SBDIP packages. AD534K, AD534S, and AD534T chips are
also available.
Rev. D
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©1977–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com


Analog Devices Semiconductor Electronic Components Datasheet

AD534 Datasheet

Internally Trimmed Precision IC Multiplier

No Preview Available !

AD534 pdf
AD534* Product Page Quick Links
Last Content Update: 11/01/2016
Comparable Parts
View a parametric search of comparable parts
Documentation
Application Notes
• AN-213: Low Cost, Two-Chip, Voltage -Controlled
Amplifier and Video Switch
Data Sheet
• AD534: Internally Trimmed Precision IC Multiplier Data
Sheet
Software and Systems Requirements
• JAN to Generic Cross Reference
Design Resources
• AD534 Material Declaration
• PCN-PDN Information
• Quality And Reliability
• Symbols and Footprints
Discussions
View all AD534 EngineerZone Discussions
Sample and Buy
Visit the product page to see pricing options
Technical Support
Submit a technical question or find your regional support
number
* This page was dynamically generated by Analog Devices, Inc. and inserted into this data sheet. Note: Dynamic changes to
the content on this page does not constitute a change to the revision number of the product data sheet. This content may be
frequently modified.


Part Number AD534
Description Internally Trimmed Precision IC Multiplier
Maker Analog Devices
Total Page 21 Pages
PDF Download
AD534 pdf
Download PDF File
AD534 pdf
View for Mobile



Buy Electronic Components




Related Datasheet

1 AD530 Integrated Circuit / Multiplier / Divider / Square Rooter Analog Devices
Analog Devices
AD530 pdf
2 AD5300 8-Bit DAC Analog Devices
Analog Devices
AD5300 pdf
3 AD5301 +2.5 V to +5.5 V/ 120 uA/ 2-Wire Interface/ Voltage Output 8-/10-/12-Bit DACs Analog Devices
Analog Devices
AD5301 pdf
4 AD5302 +2.5 V to +5.5 V/ 230 uA Dual Rail-to-Rail/ Voltage Output 8-/10-/12-Bit DACs Analog Devices
Analog Devices
AD5302 pdf
5 AD53020 Four Channel ECL Delay Line Analog Devices
Analog Devices
AD53020 pdf
6 AD5303 +2.5 V to +5.5 V/ 230 uA/ Dual Rail-to-Rail Voltage Output 8-/10-/12-Bit DACs Analog Devices
Analog Devices
AD5303 pdf
7 AD53032 High Performance Driver/Comparator Active Load on a Single Chip Analog Devices
Analog Devices
AD53032 pdf
8 AD53033 High Performance Driver/Comparator on a Single Chip Analog Devices
Analog Devices
AD53033 pdf
9 AD5304 2.5 V to 5.5 V/ 500 uA/ Quad Voltage Output 8-/10-/12-Bit DACs in 10-Lead microSOIC Analog Devices
Analog Devices
AD5304 pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components