Datasheet4U Logo Datasheet4U.com

SN74LVC74A-EP - Dual Positive-Edge-Triggered D-Type Flip-Flops

Description

The SN74LVC74A dual positive-edge-triggered D-type flip-flop is designed for 2.7-V to 3.6-V VCC operation.

A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs.

Features

  • 1.
  • Controlled Baseline.
  • One Assembly/Test Site, One Fabrication Site.
  • Extended Temperature Performance of.
  • 40°C to 125°C and.
  • 55°C to 125°C.
  • Enhanced Diminishing Manufacturing Sources (DMS) Support.
  • Enhanced Product-Change Notification.
  • Qualification Pedigree (1).
  • Operates From 2 V to 3.6 V (1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended tempera.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LVC1G125 high performance non-inverting buffer UMW
SN74LVC1G34 Single buffer UMW
SN74L71 AND-Gate R-S Master-Slave F-F National Semiconductor
SN74L74N Dual D-Type Flip-Flop ETC
SN74LS00 QUAD 2-INPUT NAND GATE Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN74LVC74A-Q1 Dual Positive-Edge-Triggered D-Type Flip-Flops
SN74LVC74A Dual Positive-Edge-Triggered D-Type Flip-Flops
SN74LVC00A Quadruple 2-Input Positive-NAND Gate
SN74LVC00A-EP Quadruple 2-Input Positive-NAND Gate
SN74LVC00A-Q1 Quadruple 2-Input Positive-NAND Gate

Full PDF Text Transcription

Click to expand full text
www.ti.com SN74LVC74A-EP DUAL POSITIVE EDGE TRIGGERED D-TYPE FLIP-FLOP WITH CLEAR AND PRESET SCAS751C – DECEMBER 2003 – REVISED SEPTEMBER 2007 FEATURES 1 • Controlled Baseline – One Assembly/Test Site, One Fabrication Site • Extended Temperature Performance of –40°C to 125°C and –55°C to 125°C • Enhanced Diminishing Manufacturing Sources (DMS) Support • Enhanced Product-Change Notification • Qualification Pedigree (1) • Operates From 2 V to 3.6 V (1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life.
Published: |