Datasheet4U Logo Datasheet4U.com

SN74LVC2T45-Q1 - DUAL-BIT DUAL-SUPPLY BUS TRANSCEIVER

Description

This dual-bit noninverting bus transceiver uses two separate configurable power-supply rails.

The A port is designed to track VCCA.

VCCA accepts any supply voltage from 1.65 V to 5.5 V.

Features

  • 1.
  • Qualified for Automotive.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LVC1G125 high performance non-inverting buffer UMW
SN74LVC1G34 Single buffer UMW
SN74L71 AND-Gate R-S Master-Slave F-F National Semiconductor
SN74L74N Dual D-Type Flip-Flop ETC
SN74LS00 QUAD 2-INPUT NAND GATE Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN74LVC2T45-EP DUAL-BIT DUAL-SUPPLY BUS TRANSCEIVER
SN74LVC2T45 Dual-Bit Dual-Supply Bus Transceiver
SN74LVC2244A Octal Buffer/Driver
SN74LVC240A Octal Buffer/Driver
SN74LVC244A Octal Buffer/Driver

Full PDF Text Transcription

Click to expand full text
SN74LVC2T45-Q1 www.ti.com SCES818 – SEPTEMBER 2010 DUAL-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS Check for Samples: SN74LVC2T45-Q1 FEATURES 1 • Qualified for Automotive Applications • Fully Configurable Dual-Rail Design Allows Each Port to Operate Over the Full 1.65-V to 5.5-V Power-Supply Range • VCC Isolation Feature – If Either VCC Input Is at GND, Both Ports Are in the High-Impedance State • DIR Input Circuit Referenced to VCCA • Low Power Consumption, 10-mA Max ICC • ±24-mA Output Drive at 3.3 V • Ioff Supports Partial-Power-Down Mode Operation • Max Data Rates – 420 Mbps (3.3-V to 5-V Translation) – 210 Mbps (Translate to 3.3 V) – 140 Mbps (Translate to 2.5 V) – 75 Mbps (Translate to 1.
Published: |