Datasheet4U Logo Datasheet4U.com

SN74LVC240A - Octal Buffer/Driver

Description

This octal buffer/driver is designed for 1.65-V to 3.6-V VCC operation.

The SN74LVC240A is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and busoriented receivers and transmitters.

Features

  • 1 Operates From 1.65 V to 3.6 V.
  • Inputs Accept Voltages to 5.5 V.
  • Max tpd of 6.5 ns at 3.3 V.
  • Typical VOLP (Output Ground Bounce) 2 V at VCC = 3.3 V, TA = 25°C.
  • Supports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V VCC).
  • Ioff Supports Live Insertion, Partial-Power-Down Mode, and Back-Drive Protection.
  • Latch-Up Performance.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LVC1G125 high performance non-inverting buffer UMW
SN74LVC1G34 Single buffer UMW
SN74L71 AND-Gate R-S Master-Slave F-F National Semiconductor
SN74L74N Dual D-Type Flip-Flop ETC
SN74LS00 QUAD 2-INPUT NAND GATE Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN74LVC244A Octal Buffer/Driver
SN74LVC244A-Q1 OCTAL BUFFER/DRIVER
SN74LVC244AN Octal Buffer/Driver
SN74LVC245A Octal Bus Transceiver
SN74LVC245A-EP OCTAL BUS TRANSCEIVER

Full PDF Text Transcription

Click to expand full text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community SN74LVC240A SCAS293L – JANUARY 1993 – REVISED JULY 2014 SN74LVC240A Octal Buffer/Driver with 3-State Outputs 1 Features •1 Operates From 1.65 V to 3.6 V • Inputs Accept Voltages to 5.5 V • Max tpd of 6.5 ns at 3.3 V • Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C • Typical VOHV (Output VOH Undershoot) >2 V at VCC = 3.3 V, TA = 25°C • Supports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.
Published: |