Datasheet4U Logo Datasheet4U.com

SN74AHCT16541 - 16-BIT BUFFERS/DRIVERS

Description

The ’AHCT16541 devices are noninverting 16-bit buffers composed of two 8-bit sections with separate output-enable signals.

For either 8-bit buffer section, the two output-enable (1OE1 and 1OE2 or 2OE1 and 2OE2) inputs must both be low for the corresponding Y outputs to be active.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74101 AND-OR Gate ETC
SN74102 AND Gate ETC
SN74103 Dual J-K Flip-Flop ETC
SN74106 Dual J-K Flip-Flop ETC
SN74108 Dual J-K Flip Flop ETC

Other Datasheets by Texas Instruments

Part Number Description
SN74AHCT16540 16-BIT BUFFERS/DRIVERS
SN74AHCT16240 16-BIT BUFFERS/DRIVERS
SN74AHCT16244 16-Bit Buffers/Drivers
SN74AHCT16245 16-Bit Bus Transceivers
SN74AHCT16373 16-Bit Transparent D-Type Latches

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN54AHCT16541, SN74AHCT16541 16-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCLS339H – MARCH 1996 – REVISED JANUARY 2000 D Members of the Texas Instruments Widebus ™ Family D EPIC ™ (Enhanced-Performance Implanted CMOS) Process D Inputs Are TTL-Voltage Compatible D Distributed VCC and GND Pins Minimize High-Speed Switching Noise D Flow-Through Architecture Optimizes PCB Layout D Latch-Up Performance Exceeds 250 mA Per JESD 17 D Package Options Include Plastic Shrink Small-Outline (DL), Thin Shrink Small-Outline (DGG), and Thin Very Small-Outline (DGV) Packages and 380-mil Fine-Pitch Ceramic Flat (WD) Package Using 25-mil Center-to-Center Spacings description The ’AHCT16541 devices are noninverting 16-bit buffers composed of two 8-bit sections with separate output-enable signals.
Published: |