Datasheet4U Logo Datasheet4U.com

LE24LA322CS - Two Wire Serial Interface EEPROM

Description

PIN.1 PIN.2 NC GND VDD WP SCL SDA Nonconnected pin Ground Power supply Write protect Serial clock input Serial data input/output 1 2 3 PIN.3 PIN.4 PIN.5 6 5 4 PIN.6 1.50 x 1.06 x 0.50(max) Block Diagram WP SCL Input buffer Condition detector Serial controller Write controller High volta

Features

  • e address and write command code "0" after the start condition, it g.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet.co.kr Ordering number : ENA1463A CMOS IC LE24LA322CS Overview Two Wire Serial Interface EEPROM (32k EEPROM) The LE24LA322CS is a 2-wire serial interface EEPROM. It realizes high speed and a high level reliability by incorporating SANYO’s high performance CMOS EEPROM technology. This device is compatible with I2C memory protocol, therefore it is best suited for application that requires small-scale re-writable nonvolatile parameter memory. Functions • Capacity: 32k bits (4k × 8 bits) • Single supply voltage: 1.7V to 3.6V • Interface: Two wire serial interface (I2C Bus*) • slave addresses: S2=0, S1=1, S0=0 • Operating clock frequency: 400kHz • Low power consumption : Standby: 2μA (max) : Active (Read): 0.
Published: |