Datasheet4U Logo Datasheet4U.com

LE24LA162CB - Two Wire Serial Interface EEPROM

Description

PIN.1 PIN.2 PIN.3 GND GND VDD WP SCL SDA Ground Ground Power supply Write protect Serial clock input Serial data input/output 4 3 5 2 6 1 PIN.4 PIN.5 1.50mm × 1.06mm × 0.5mm PIN.6 Block Diagram WP SCL Input buffer Condition detector Serial controller Write controller High voltage generator

Features

  • PROM rewrite operation, no input is accepted and no acknowle.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LE24L042CS-B Two Wire Serial Interface EEPROM ON Semiconductor
LE24162LBXA Two Wire Serial Interface EEPROM ON Semiconductor
LE24162LBXA Two Wire Serial Interface EEPROM Sanyo
LE24163LBXA 16kb I2C CMOS Serial EEPROM ON Semiconductor
LE2416DXA EEPROM ON Semiconductor

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LE24LA322CS Two Wire Serial Interface EEPROM
LE24L0221 Two Wire Serial Interface EEPROM
LE24L042CS Two Wire Serial Interface EEPROM
LE24L043CB Two Wire Serial Interface EEPROM
LE24L082 Two Wire Serial Interface EEPROM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet.co.kr Ordering number : ENA1695 CMOS IC LE24LA162CB Overview Two Wire Serial Interface EEPROM (16k EEPROM) The LE24LA162CB is a 2-wire serial interface EEPROM. It realizes high speed and a high level reliability by incorporating SANYO’s high performance CMOS EEPROM technology. This device is compatible with I2C memory protocol, therefore it is best suited for application that requires small-scale re-writable nonvolatile parameter memory. Functions • Capacity: 16k bits (2k × 8 bits) • Single supply voltage: 1.7V to 3.6V • Interface: Two wire serial interface (I2C Bus*) • Operating clock frequency: 400kHz • Low power consumption : Standby: 2μA (max) : Active (Read): 0.
Published: |