Datasheet4U Logo Datasheet4U.com

LE24L082 - Two Wire Serial Interface EEPROM

Description

PIN.1 NC NC NC GND SDA SCL NC VDD Nonconnected pin Nonconnected pin Nonconnected pin Ground Serial data input/output Serial clock input Nonconnected pin Power supply 1 (0.53) 2 0.65 0.25 (0.85) 1.1MAX 0.125 0.5 PIN.2 PIN.3 PIN.4 PIN.5 PIN.6 0.08 PIN.7 PIN.8 SANYO : MSOP8(150mil) Block Diag

Features

  • ration 6-1. Byte writing When the EEPROM receives the 7-bit devi.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LE24L042CS-B Two Wire Serial Interface EEPROM ON Semiconductor
LE24162LBXA Two Wire Serial Interface EEPROM ON Semiconductor
LE24162LBXA Two Wire Serial Interface EEPROM Sanyo
LE24163LBXA 16kb I2C CMOS Serial EEPROM ON Semiconductor
LE2416DXA EEPROM ON Semiconductor

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LE24L0221 Two Wire Serial Interface EEPROM
LE24L042CS Two Wire Serial Interface EEPROM
LE24L043CB Two Wire Serial Interface EEPROM
LE24L162 Two Wire Serial Interface EEPROM
LE24L322CS Two Wire Serial Interface EEPROM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet.co.kr Ordering number : ENA1583 LE24L082 Overview CMOS IC Two Wire Serial Interface EEPROM (8k EEPROM) The LE24L082 is a 2-wire serial interface EEPROM. It realizes high speed and a high level reliability by incorporating SANYO’s high performance CMOS EEPROM technology. This device is compatible with I2C memory protocol, therefore it is best suited for application that requires small-scale re-writable nonvolatile parameter memory. Functions • Capacity: 8k bits (1k × 8 bits) • Single supply voltage: 1.8V to 5.5V • Interface: Two wire serial interface (I2C Bus*) • Operating clock frequency: 400kHz • Low power consumption : Standby: 2μA (max) : Active (Read): 0.
Published: |