Datasheet4U Logo Datasheet4U.com

LE24CBP222 - Two Wire Serial Interface EEPROM

Description

PIN.1 PIN.2 PIN.3 PIN.4 PIN.5 PIN.6 PIN.7 PIN.8 PIN.9 PIN.10 SCL1 SDA1 VDD1 SDA2 GND SDAC SCLC VDDC SCL2 VDD2 Clock input Data input/output Power supply Data input/output Ground Data input/output Clock input Power supply Clock input Power supply Port 2 Control port Port 2 Port 1 No.1812-2/20 Datas

Features

  • a control port, which is a third pin separate from the pins used for the banks, and by accessing the memory areas from this control port, the two-bank configuration (2K bits + 2K bits) can be used as a pseudo-one-bank configuration (4K bits). Together with the 16-byte page write function, this enables a reduction in the number of factory write processes. Furthermore, the EEPROM has a configuration area which is separate from the 2K-bit + 2K-bit area, and by using the settings stored in this conf.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LE24CBK23MC Dual port EEPROM Two Wire Serial Interface ON Semiconductor
LE24162LBXA Two Wire Serial Interface EEPROM ON Semiconductor
LE24162LBXA Two Wire Serial Interface EEPROM Sanyo
LE24163LBXA 16kb I2C CMOS Serial EEPROM ON Semiconductor
LE2416DXA EEPROM ON Semiconductor

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LE24CB1283 Two Wire Serial Interface EEPROM
LE24CB642 Two Wire Serial Interface EEPROM
LE24CBK22 Two Wire Serial Interface EEPROM
LE24CBK222 Two Wire Serial Interface EEPROM
LE24C0221M Two Wire Serial Interface EEPROM

Full PDF Text Transcription

Click to expand full text
www.DataSheet.co.kr Ordering number : EN*A1812 CMOS IC LE24CBP222 Overview Power switch integrated triple port EEPROM Two Wire Serial Interface (2K+2K EEPROM) The power switch integrated triple port EEPROM series consists of two independent banks, and each bank can be controlled separately using dedicated control pins. The EEPROM also features a control port, which is a third pin separate from the pins used for the banks, and by accessing the memory areas from this control port, the two-bank configuration (2K bits + 2K bits) can be used as a pseudo-one-bank configuration (4K bits). Together with the 16-byte page write function, this enables a reduction in the number of factory write processes.
Published: |