Datasheet4U Logo Datasheet4U.com

LE24CB1283 - Two Wire Serial Interface EEPROM

Description

PIN.1 PIN.2 PIN.3 PIN.4 PIN.5 PIN.6 PIN.7 PIN.8 S0 S1 S2 GND SDA SCL WP VDD Slave Device Address 0 Slave Device Address 1 Slave Device Address 2 Ground Serial data input/output Serial clock input Write protect Power supply Block Diagram WP Input Buffer Condition detector Write controller Serial

Features

  • vice only responds if Slave address pin tied to VDD or GND is the same as the S.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LE24CBK23MC Dual port EEPROM Two Wire Serial Interface ON Semiconductor
LE24162LBXA Two Wire Serial Interface EEPROM ON Semiconductor
LE24162LBXA Two Wire Serial Interface EEPROM Sanyo
LE24163LBXA 16kb I2C CMOS Serial EEPROM ON Semiconductor
LE2416DXA EEPROM ON Semiconductor

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LE24CB642 Two Wire Serial Interface EEPROM
LE24CBK22 Two Wire Serial Interface EEPROM
LE24CBK222 Two Wire Serial Interface EEPROM
LE24CBP222 Two Wire Serial Interface EEPROM
LE24C0221M Two Wire Serial Interface EEPROM

Full PDF Text Transcription

Click to expand full text
www.DataSheet.co.kr Ordering number : ENA1887 CMOS IC LE24CB1283 Overview Two Wire Serial Interface EEPROM (128K EEPROM) The LE24CB1283 (hereinafter referred to as ‘this device’) is two-wire serial interface EEPROM (Electrically Erasable and Programmable ROM). This device realizes high speed and a high level reliability by SANYO’s high performance CMOS EEPROM technology. This device is compatible with I2C memory protocol, therefore it is best suited for application that requires re-writable nonvolatile parameter memory. Functions • Capacity : 128K bits (16k × 8 bits) • Single supply voltage : 2.7V to 5.5V. • Interface : Two wire serial interface (I2C Bus*) • Operating clock frequency : 400kHz • Low power consumption : Standby: 2μA (max), Active(read): 1mA (max.
Published: |