Datasheet4U Logo Datasheet4U.com

LE24CBK22 - Two Wire Serial Interface EEPROM

Description

PIN.1 PIN.2 SCL2 SDA2 COBM GND SDA1 SCL1 WP VDD Serial clock input Serial data input/output (For Bank2) SCL2 SDA2 COBM GND 1 2 3 4 8 7 6 5 VDD WP SCL1 SDA1 PIN.3 PIN.4 PIN.5 PIN.6 PIN.7 PIN.8 0.08 Bank/combine mode switching Ground Serial data input/output Serial clock input Write protect Po

Features

  • es of the SCL1 clock signal. This pin must be pulled up by a resistor to the VDD level, and wired-ORe.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LE24CBK23MC Dual port EEPROM Two Wire Serial Interface ON Semiconductor
LE24162LBXA Two Wire Serial Interface EEPROM ON Semiconductor
LE24162LBXA Two Wire Serial Interface EEPROM Sanyo
LE24163LBXA 16kb I2C CMOS Serial EEPROM ON Semiconductor
LE2416DXA EEPROM ON Semiconductor

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LE24CBK222 Two Wire Serial Interface EEPROM
LE24CB1283 Two Wire Serial Interface EEPROM
LE24CB642 Two Wire Serial Interface EEPROM
LE24CBP222 Two Wire Serial Interface EEPROM
LE24C0221M Two Wire Serial Interface EEPROM

Full PDF Text Transcription

Click to expand full text
www.DataSheet.co.kr Ordering number : EN*A1514A LE24CBK22 Overview CMOS IC Two Wire Serial Interface EEPROM (2K+2K EEPROM) The dual port EEPROM series consists of two independent banks, and each bank can be controlled separately using dedicated control pins. The two banks can each be controlled separately, but share the internal power supply system. In addition, this product uses a 2-wire serial interface, and is the optimal device for realizing substantial reductions in system cost and mounting area, as well as low power consumption. The dual port EEPROM series also has a combined mode that allows the two-bank configuration (2K bits + 2K bits) to be used as a pseudo one-bank configuration (4K bits) by setting the COBM pin low.
Published: |