Datasheet4U Logo Datasheet4U.com

STELPD01 - Electronic load switch

Description

The STELPD01 is an integrated electronic power switch for power rail protection applications.

It is able to precisely detect and react to overcurrent and overvoltage conditions.

When an overload condition occurs, the device goes into an open state, disconnecting the load from the power supply.

Features

  • Wide input voltage range: 4 V to 18 V.
  • 17.5 V typical output overvoltage clamp.
  • Absolute maximum voltage of 23.5 V.
  • 5 A maximum continuous current.
  • Adjustable current limit with circuit breaker functionality.
  • Thermal protection.
  • Input undervoltage lockout.
  • Low inrush current during startup.
  • Integrated 40 mΩ Power FET.
  • EN/Fault pin.
  • Adjustable slew rate for output voltage.
  • Gate control pin.

📥 Download Datasheet

Datasheet preview – STELPD01

Datasheet Details

Part number STELPD01
Manufacturer STMicroelectronics
File Size 1.39 MB
Description Electronic load switch
Datasheet download datasheet STELPD01 Datasheet
Additional preview pages of the STELPD01 datasheet.

📁 Similar Datasheet

  • STEL-1175 - 32-Bit Resolution CMOS Phase Modulated Numerically Controlled Oscillator (Intel)
  • STEL-2000A - Fast Acquisition Burst Processor (Intel Corporation)
  • STEL-2000A - Burst Processor (Stanford Telecommunications)
  • STEL-2020 - STEL-2020 (Stanford)
  • STEL-2060 - 45Mbps Viterbi Decoder (Stanford Telecommunications)
  • STEL-2060C - 45Mbps Viterbi Decoder (Intel)
  • STEL-2060CR - 45Mbps Viterbi Decoder (Intel)
  • STEL-5268 - STEL-5268 (Stanford Telecommunications)
  • STEL-5269 - Convolutional Encoder Viterbi Decoder (Stanford Telecommunications)
  • STEL-5269+512 - Convolutional Encoder Viterbi Decoder (Intel)
Other Datasheets by STMicroelectronics

Full PDF Text Transcription

Click to expand full text
DFN10L (3x3 mm) Maturity status link STELPD01 STELPD01 Datasheet Electronic load switch for power line Features • Wide input voltage range: 4 V to 18 V • 17.5 V typical output overvoltage clamp • Absolute maximum voltage of 23.5 V • 5 A maximum continuous current • Adjustable current limit with circuit breaker functionality • Thermal protection • Input undervoltage lockout • Low inrush current during startup • Integrated 40 mΩ Power FET • EN/Fault pin • Adjustable slew rate for output voltage • Gate control pin for reverse current blocking FET • Latch or auto-retry • Available in DFN10L (3x3 mm) package • UL2367 Recognized - File N.
Published: |