Datasheet4U Logo Datasheet4U.com

CLC5526 - Digital Variable Gain Amplifier (DVGA)

Description

The CLC5526 is a high performance, digitally controlled, variable-gain amplifier (DVGA).

Features

  • n n n n n 350 MHz bandwidth Differential input and output Gain control: parallel w/data latching Supply voltage: +5V Supply current: 48 mA Key Specifications n Low two tone intermod: distortion:.
  • 64 dBc @ 1 VPP, 150 MHz 24.5 dBm IP3, 150 MHz n Low noise: 2.5 nV/√Hz (max gain), 9.3 dB noise figure (max gain) n Wide gain range: +30 dB to.
  • 12 dB n Gain step size: 6 dB.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CLC-207 Low Distortion Wideband Op Amp Comlinear Corporation
CLC001 CLC001 Serial Digital Cable Driver with Adjustable Outputs (Rev. B) ETCTI
CLC006 CLC006 Serial Digital Cable Driver with Adjustable Outputs (Rev. G) ETCTI
CLC007 CLC007 Serial Digital Cable Driver with Dual Complementary Outputs (Rev. E) ETCTI
CLC020 CLC020 SMPTE 259M Digital Video Serializer with Integrated Cable Driver (Rev. E) ETCTI

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
CLC5523 Low-Power/ Variable Gain Amplifier
CLC5506 Gain Trim Amplifier (GTA)
CLC5509 Ultra-Low Noise Preamplifier
CLC501 High-Speed Output Clamping Op Amp
CLC502 Clamping/ Low-Gain Op Amp with Fast 14-bit Settling

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CLC5526 Digital Variable Gain Amplifier (DVGA) June 1999 CLC5526 Digital Variable Gain Amplifier (DVGA) General Description The CLC5526 is a high performance, digitally controlled, variable-gain amplifier (DVGA). It has been designed for use in a broad range of mixed signal and digital communication applications such as mobile radio, cellular base stations and back-channel modems where automatic-gain-control (AGC) is required to increase system dynamic range. The CLC5526 has differential input and output, allowing large signal swings on a single 5V rail. The input impedance is 200Ω. The differential output impedance is 600Ω and is designed to drive a 1 kΩ differential load. The output amplifier has excellent intermodulation performance.
Published: |