Datasheet4U Logo Datasheet4U.com

IR2113C - High and Low Side Driver

Download the IR2113C datasheet PDF. This datasheet also covers the IR2110C variant, as both devices belong to the same high and low side driver family and are provided as variant models within a single manufacturer datasheet.

Description

The IR2110/IR2113 are high voltage, high speed power MOSFET and IGBT drivers with independent high and low side referenced output channels.

Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction.

Features

  • 100 % Tested at Probec.
  • 3.3V logic compatible.
  • Available in Chip Pack, Unsawn Wafer, Sawn on Film d Separate logic supply range from 3.3V to 20V.
  • Floating channel designed for bootstrap operation Logic and power ground ±5V offset Fully operational to +500V or +600V.
  • CMOS Schmitt-triggered inputs with pull-down Tolerant to negative transient voltage.
  • Cycle by cycle edge-triggered shutdown logic dV/dt immune.
  • Matched propagation delay.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (IR2110C_InternationalRectifier.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
IR2186 HIGH AND LOW SIDE DRIVER IRF
IR21864PBF HIGH AND LOW SIDE DRIVER IRF
IR21864SPBF HIGH AND LOW SIDE DRIVER IRF
IR2186S HIGH AND LOW SIDE DRIVER IRF
IR21BD Infrared Single Gas Sensor SGX

Other Datasheets by International Rectifier (now Infineon)

Part Number Description
IR2113 HIGH AND LOW SIDE DRIVER
IR2113E6 HIGH AND LOW SIDE DRIVER
IR2113PBF HIGH AND LOW SIDE DRIVER
IR2113S HIGH AND LOW SIDE DRIVER
IR2113SPBF HIGH AND LOW SIDE DRIVER

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com Data Sheet No. PD65001 IR2110C/IR2113C HIGH AND LOW SIDE DRIVER IN DIE WAFER FORM Features • 100 % Tested at Probec • 3.3V logic compatible • Available in Chip Pack, Unsawn Wafer, Sawn on Film d Separate logic supply range from 3.3V to 20V • Floating channel designed for bootstrap operation Logic and power ground ±5V offset Fully operational to +500V or +600V • CMOS Schmitt-triggered inputs with pull-down Tolerant to negative transient voltage • Cycle by cycle edge-triggered shutdown logic dV/dt immune • Matched propagation delay for both channels • Gate drive supply range from 10 to 20V • Outputs in phase with inputs • Undervoltage lockout for both channels Typical Connection www.DataSHeet4U.
Published: |