Datasheet4U Logo Datasheet4U.com

BM1509HV - 2A PWM BUCK DC/DC CONVERTER

Features

  • include a guaranteed +4% tolerance on output voltage under specified input voltage and output load condit.

📥 Download Datasheet

Datasheet preview – BM1509HV

Datasheet Details

Part number BM1509HV
Manufacturer Bookly
File Size 427.08 KB
Description 2A PWM BUCK DC/DC CONVERTER
Datasheet download datasheet BM1509HV Datasheet
Additional preview pages of the BM1509HV datasheet.

📁 Similar Datasheet

  • BM1501-7R - 50 Watt DC-DC Converters (Power-One)
  • BM1501-7R - 50 Watt DC-DC Converters (Power-One)
  • BM1513 - PWM Control 2-3A Step-Down Converter (ETC)
  • BM1513A - PWM Control 2-3A Step-Down Converter (ETC)
  • BM100-28 - NPN SILICON RF POWER TRANSISTOR (ASI)
  • BM1001-7R - 50 Watt DC-DC Converters (Power-One)
  • BM1012LF - COMMON MODE CHOKE COIL (Sumida Corporation)
  • BM1031 - X-Band Magnetron (EEV)
  • BM1050AF-G - Quasi-Resonant Control DC/DC converter and Power Factor Correction converter (ROHM)
  • BM1051F - Quasi-Resonant Control DC/DC converter and Power Factor Correction converter (Rohm)
Other Datasheets by Bookly
  • BM1507 - 3A PWM BUCK DC/DC CONVERTER
  • BM1513-H - PWM Control 2A Step-Down Converter
  • BM1584 - 30V 3A 500KHz Synchronous Step-Down Regulator
  • BM1588 - 18V 2A 500KHz Synchronous Step-Down Regulator
  • BM15N10 - 100V N-Channel Enhancement Mode MOSFET
  • BM1117A - Adjustable and fixed voltage regulator
  • BM1117N - 1A Voltage High Speed LDO Regulators
  • BM1410A - 2.2A Step-Down Converter

Full PDF Text Transcription

Click to expand full text
BOOKLY MICRO BM1509HV 150KHz, 2A PWM BUCK DC/DC CONVERTER The BM1509HV are monolithic IC designed for a stepdown DC/DC converter, and own the ability of driving a 2A load without additional transistor. It saves board space. The external shutdown function can be controlled by logic level and then come into standby mode. The internal compensation makes feedback control having good line and load regulation without external design. Regarding protected function, thermal shutdown is to prevent over temperature operating from damage, and current limit is against over current operating of the output switch. If current limit function occurs and VFB is down below 0.5V, the switching frequency will be reduced.
Published: |