Datasheet4U Logo Datasheet4U.com

74CBTLVD3245-Q100 - 8-bit level-shifting bus switch

General Description

The 74CBTLVD3245-Q100 is an 8-pole, single-throw bus switch.

Key Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Supply voltage range from 3.0 V to 3.6 V.
  • High noise immunity.
  • Complies with JEDEC standard:.
  • JESD8-B/JESD36 (3.0 V to 3.6 V).
  • ESD protection:.
  • MIL-STD-883, method 3015 exceeds 2000 V.
  • HBM JESD22-A114F exceeds 2000 V.
  • CDM AEC-Q100-011 revision B exceeds 1000 V.
  • 5 Ω sw.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74CBTLV16210 LOW-VOLTAGE 20-BIT BUS SWITCH Renesas
74CBTLV16212 LOW-VOLTAGE 24-BIT BUS EXCHANGE SWITCH IDT
74CBTLV16212 LOW-VOLTAGE 24-BIT BUS EXCHANGE SWITCH Renesas
74CBTLV3125 4-bit bus switch NXP
74CBTLV3126 4-bit Bus Switch NXP

Other Datasheets by Nexperia

Part Number Description
74CBTLVD3245 8-bit level-shifting bus switch
74CBTLVD3244 8-bit level-shifting bus switch
74CBTLVD3384 10-bit level-shifting bus switch
74CBTLVD3861 10-bit level-shifting bus switch
74CBTLV1G125 Single bus switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74CBTLVD3245-Q100 8-bit level-shifting bus switch with output enable Rev. 5 — 4 February 2021 Product data sheet 1. General description The 74CBTLVD3245-Q100 is an 8-pole, single-throw bus switch. The device features a single output enable input (OE) that controls eight switch channels. The switches are disabled when OE is HIGH. Schmitt trigger action at control inputs makes the circuit tolerant of slower input rise and fall times. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.