Datasheet4U Logo Datasheet4U.com

74CBTLVD3861 - 10-bit level-shifting bus switch

Description

The 74CBTLVD3861 is a 10-bit 3.3 V to 1.8 V level translating bus switch with one output enable (OE) input.

When OE is LOW, the switch is closed and port A is connected to the B port.

When OE is HIGH, the switch is disabled.

Features

  • Supply voltage range from 3.0 V to 3.6 V.
  • High noise immunity.
  • Complies with JEDEC standard:.
  • JESD8-B/JESD36 (3.0 V to 3.6 V).
  • ESD protection:.
  • HBM JESD22-A114F exceeds 2000 V.
  • CDM AEC-Q100-011 revision B exceeds 1000 V.
  • 4 Ω switch connection between two ports.
  • 3.3 V to 1.8 V level translation.
  • CMOS low power consumption.
  • Latch-up performance exceeds 250 mA per JESD78B Class I level A.
  • IO.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74CBTLV16210 LOW-VOLTAGE 20-BIT BUS SWITCH Renesas
74CBTLV16212 LOW-VOLTAGE 24-BIT BUS EXCHANGE SWITCH IDT
74CBTLV16212 LOW-VOLTAGE 24-BIT BUS EXCHANGE SWITCH Renesas
74CBTLV3125 4-bit bus switch NXP
74CBTLV3126 4-bit Bus Switch NXP

Other Datasheets by Nexperia

Part Number Description
74CBTLVD3244 8-bit level-shifting bus switch
74CBTLVD3245 8-bit level-shifting bus switch
74CBTLVD3245-Q100 8-bit level-shifting bus switch
74CBTLVD3384 10-bit level-shifting bus switch
74CBTLV1G125 Single bus switch

Full PDF Text Transcription

Click to expand full text
74CBTLVD3861 10-bit level-shifting bus switch with output enable Rev. 5 — 18 April 2019 Product data sheet 1. General description The 74CBTLVD3861 is a 10-bit 3.3 V to 1.8 V level translating bus switch with one output enable (OE) input. When OE is LOW, the switch is closed and port A is connected to the B port. When OE is HIGH, the switch is disabled. To ensure the high-impedance OFF-state during power-up or power-down, OE should be tied to the VCC through a pull-up resistor. The minimum value of the resistor is determined by the current-sinking capability of the driver. Schmitt trigger action at control input makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 3.0 V to 3.6 V.
Published: |