Datasheet4U Logo Datasheet4U.com

74CBTLV3245-Q100 - 8-bit bus switch

General Description

The 74CBTLV3245-Q100 is an 8-pole, single-throw bus switch.

Key Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Supply voltage range from 2.3 V to 3.6 V.
  • High noise immunity.
  • Complies with JEDEC standard:.
  • JESD8-5 (2.3 V to 2.7 V).
  • JESD8-B/JESD36 (2.7 V to 3.6 V).
  • ESD protection:.
  • MIL-STD-883, method 3015 exceeds 2000 V.
  • HBM JESD22-A114F exceeds 2000 V.
  • MM JESD22-A115-A exceeds.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74CBTLV3245 8-bit bus NXP
74CBTLV3245 LOW-VOLTAGE OCTAL BUS SWITCH Renesas
74CBTLV3244 LOW-VOLTAGE OCTAL BUS SWITCH Renesas
74CBTLV3244 LOW-VOLTAGE OCTAL BUS SWITCH IDT
74CBTLV3253 LOW-VOLTAGE DUAL 1-OF-4 MULTIPLEXER/DEMULTIPLEXER Renesas

Other Datasheets by Nexperia

Part Number Description
74CBTLV3245 8-bit bus switch
74CBTLV3244 8-bit bus switch
74CBTLV3253 Dual 1-of-4 multiplexer/demultiplexer
74CBTLV3253-Q100 Dual 1-of-4 multiplexer/demultiplexer
74CBTLV3253D Dual 1-of-4 multiplexer/demultiplexer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74CBTLV3245-Q100 8-bit bus switch with output enable Rev. 4 — 7 May 2020 Product data sheet 1. General description The 74CBTLV3245-Q100 is an 8-pole, single-throw bus switch. The device features a single output enable input (OE) that controls eight switch channels. The switches are disabled when OE is HIGH. Schmitt-trigger action at control inputs makes the circuit tolerant of slower input rise and fall times. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.