Datasheet4U Logo Datasheet4U.com

F6521 - 8-Ch Tx Active Beamforming

Datasheet Summary

Description

The F6521 is an 8-channel transmit active beamforming RFIC designed for application in Ku-band SATCOM planar phased array antennas.

The IC has a single common RF input port and eight output channels.

Features

  • a low power standby mode as well as independent enable controls on every channel. The device’s SPI bus and control pins operate from standard 1.8V logic at speeds up to 50MHz. Advanced digital modes and large on-chip memory allows for < 100ns beam position switching times at the array level, greatly reducing dead time and latency. Finally, the compact and CTE-matched FC-BGA organic package with all single-ended 50ohm matched RF ports greatly simplifies the physical integration of the F6521 onto.

📥 Download Datasheet

Datasheet preview – F6521

Datasheet Details

Part number F6521
Manufacturer Renesas
File Size 124.33 KB
Description 8-Ch Tx Active Beamforming
Datasheet download datasheet F6521 Datasheet
Additional preview pages of the F6521 datasheet.

📁 Similar Datasheet

  • F6501 - Ku-Band SATCOM Transmitter (IDT)
  • F6502 - Ka-Band SATCOM Transmitter (IDT)
  • F6503 - Common Data Link (CDL) TX (IDT)
  • F650B - N-Channel MOSFET (VBsemi)
  • F654B - Power MOSFET (VBsemi)
  • F65540 - High Performance Flat Panel / CRT VGA Controller (Chips & Technologies)
  • F65545 - High Performance Flat Panel / CRT VGA Controller (Chips & Technologies)
  • F65550 - 65550 DC Drive Characteristics (Asiliant Technologies)
  • F65550B - VL-Bus (Digital)
  • F6584 - WIDE DYNAMIC RANGE MICROCHANNEL PLATES (Hamamatsu Corporation)
Other Datasheets by Renesas

    Full PDF Text Transcription

    Click to expand full text
    8-Ch Tx Active Beamforming IC 13.75 – 14.5 GHz F6521 Short-Form Datasheet Description The F6521 is an 8-channel transmit active beamforming RFIC designed for application in Ku-band SATCOM planar phased array antennas. The IC has a single common RF input port and eight output channels. The eight independently controlled output channels can drive eight single-polarized elements or four dualpolarized elements of an electronically scanned array (ESA). Each channel has 6 bits of digital phase control covering 360° and 25dB of gain control with a minimum step size of 0.2dB, enabling precise beam pattern and polarization control. Operating from a single supply of 2.1 - 2.5V, the RFIC has 28dB of nominal small signal gain with a typical P1dB of 10.5dBm per channel.
    Published: |