TDA8586 - Power amplifier with load detection and auto BTL/SE selection

NXP

The TDA8586 by NXP is a Power amplifier with load detection and auto BTL/SE selection. Below is the official datasheet preview.

📥 Download Datasheet

TDA8586 Power amplifier with load detection and auto BTL/SE selection by NXP - Datasheet Preview — Official preview page of the **TDA8586** Power amplifier with load detection and auto BTL/SE selection datasheet (NXP).

Datasheet Details

Part number	TDA8586
Manufacturer	NXP
File Size	138.94 KB
Description	Power amplifier with load detection and auto BTL/SE selection
Datasheet	TDA8586_PhilipsSemiconductors.pdf
Additional preview pages of the TDA8586 datasheet.

TDA8586 Product details

Description

plastic DIL-bent-SIL power package; 17 leads (lead length 12 mm) heatsink small outline package; 20 leads; low stand-off GENERAL DESCRIPTION TDA8586 The IC incorporates the following functions: 1. 4 × 6 W SE amplifies without SE capacitor, because of the availability of 2 half supply voltage power buffers 2. 2 × 20 W BTL amplifiers 3. Automatic switching between 2 and 4 speaker operation.The mode of operation is determined during start-up.This amplifier is protected for all general short-cir

Features

General.
Operating voltage from 8 to 18 V.
Low distortion.
Few external components, fixed gain.
Automatic mode selection (SE or BTL) depending on connected ‘rear’ loads.
Can be used as a stereo amplifier in Bridge-Tied Load (BTL) or quad Single-Ended (SE) amplifiers.
Single-ended mode without loudspeaker capacitor.
Soft clipping, to guarantee good clip behaviour with inductive loads.
Mute and standby mode with one-pin operat.

📁 TDA8586 Similar Datasheet

TDA8588AJ - Power Amplifier and Multiple Voltage Regulator (Philips)
TDA8588BJ - Power Amplifier and Multiple Voltage Regulator (Philips)
TDA8588J - Power Amplifier and Multiple Voltage Regulator (Philips)
TDA8589BJ - I2C Bus Controlled 4 x 45 Watt Power Amplifier and Multiple Voltage Regulator (Philips)
TDA8547 - 2 x 0.7W BTL AUDIO AMPLIFIER (UTC)
TDA8559T - Low-voltage stereo headphone amplifier (Philips)
TDA8566 - stereo BTL car radio power amplifier (NXP Semiconductors)
TDA8577 - Dual common-mode rejection differential line receiver (Philips)

Other Datasheets by NXP

TDA8580 - Multi-purpose power amplifier
TDA8580J - Multi-purpose power amplifier
TDA8581 - Multi-purpose high-gain power amplifier
TDA8587J - 4 x 25 W BTL power amplifier
TDA8589J - I2C Bus Controlled 4 x 45 Watt Power Amplifier and Multiple Voltage Regulator
TDA8589xJ - I2C Bus Controlled 4 x 45 Watt Power Amplifier and Multiple Voltage Regulator

Published: Apr 16, 2005 |