TDA8595 - I2C-bus controlled 4 x 45 W power amplifer

NXP Semiconductors

Datasheet Details

Part number	TDA8595
Manufacturer	NXP Semiconductors
File Size	358.14 KB
Description	I2C-bus controlled 4 x 45 W power amplifer
Datasheet	TDA8595_NXPSemiconductors.pdf

The TDA8595 is a complementary quad Bridge Tied Load (BTL) audio power ampliﬁer made in BCDMOS technology.

2.1 General I I I I I I I I I I I I Operates in legacy mode (non I2C-bus) and I2C-bus mode (3.3 V and 5 V compliant) Three hardware-programmable I2C-bus addresses Drive 4 Ω or 2 Ω loads Speaker fault detection Independent short-circuit protection per channel Loss of ground and open VP safe (with 150 mΩ series impedance and a supply decoupling capacitor of 2200 µF maximum) All outputs short-circuit proof to ground, supply voltage and across the load All pins short-circuit proof to ground Temperat.

📁 TDA8595 Similar Datasheet

TDA8591J - 4 X 44 W into 4 or 4 X 75 W into 2 quad BTL car radio power amplifier (NXP)
TDA8592J - (TDA8592J/Q) I2C Bus Controlled 4 x 50W Power Amplifier (NXP)
TDA8592Q - (TDA8592J/Q) I2C Bus Controlled 4 x 50W Power Amplifier (NXP)
TDA8594 - 4 x 50W power amplifier (NXP)
TDA8596 - 4 x 45 W power amplifier (NXP)
TDA8501 - PAL/NTSC encoder (NXP)
TDA8505 - SECAM encoder (NXP)
TDA8510J - 26 W BTL and 2 x 13 W SE power amplifiers (NXP)

Other Datasheets by NXP Semiconductors

Published: May 31, 2010 |