TDA8596 - 4 x 45 W power amplifier

Name: TDA8596
SKU: TDA8596-964506

NXP

Datasheet Details

The TDA8596 is a quad Bridge Tied Load (BTL) audio power ampliﬁer with symmetrical inputs, made in BCDMOS technology.

2.1 General I Operates in legacy mode (non I2C-bus) and I2C-bus mode (3.3 V and 5 V compliant) I Three hardware-programmable I2C-bus addresses I Drives 4 Ω or 2 Ω loads I Balanced/symmetrical inputs I Speaker fault detection I Programmable gain (26 dB and 16 dB) also available in legacy mode I Independent short circuit protection per channel I Loss of ground and loss of VP safe (with 300 mΩ series impedance and a maximum supply decoupling capacitor of 2200 µF) I All outputs are short-circuit pro.

📁 TDA8596 Similar Datasheet

Other Datasheets by NXP

TDA8591J - 4 X 44 W into 4 or 4 X 75 W into 2 quad BTL car radio power amplifier
TDA8592J - (TDA8592J/Q) I2C Bus Controlled 4 x 50W Power Amplifier
TDA8592Q - (TDA8592J/Q) I2C Bus Controlled 4 x 50W Power Amplifier
TDA8594 - 4 x 50W power amplifier
TDA8501 - PAL/NTSC encoder
TDA8505 - SECAM encoder

Published: Feb 4, 2016 |